50MHz～1.5GHz 1W 高线性驱动放大器

GX1656TA 是一款基于 GaAs 工艺的的高线性单片驱动放大器芯片。该芯片采用SOT89 封装，在 1.4GHz 小信号增益 17.7dB，输出功率 1dB 压缩点 31.9dBm，输出功率三阶交调点 42.2dBm。该产品适用于无线通信基础设施、FDD/TDD 基站、雷达、高功率放大器驱动级或末级等应用中。 • 工作频率：50MHz～1.5GHz\n• 输出 1dB 压缩功率：31.9dBm@1.4GHz\n• 饱和输出功率：33.8dBm@1.4GHz\n• 封装形式：SOT89（塑封）\n;

BONRAY

博瑞集信

Surge Protected, Single Input, Dual Output Load Switch with OVP

Features • Single Input, Dual Output Low-RON Switch  VBUS to VOUT: 20mΩ typ  VBUS to SYS: 35mΩ typ  Reverse Blocking on Both Switch Paths • Wide Input Voltage Range: 2.7V – 13.2V  VBUS Abs Max: -6V to 28V • Surge Protected VBUS  IEC61000-4-5: > ±200V • ESD Protection  IEC61000-4-

文件：134.49 Kbytes 页数：2 Pages

KINETIC

芯凯电子

Surge Protected, Single Input, Dual Output Load Switch with OVP

Features • Single Input, Dual Output Low-RON Switch  VBUS to VOUT: 20mΩ typ  VBUS to SYS: 35mΩ typ  Reverse Blocking on Both Switch Paths • Wide Input Voltage Range: 2.7V – 13.2V  VBUS Abs Max: -6V to 28V • Surge Protected VBUS  IEC61000-4-5: > ±200V • ESD Protection  IEC61000-4-

文件：134.49 Kbytes 页数：2 Pages

KINETIC

芯凯电子

2-Phase Stepping Motor Driver

Overview The LB1656 is a dual bridge driver IC suited for use in 2-phase bipolar stepping motor driver for FDD (3 to 5.25 inches) head actuator. The maximum driver current×voltage is 0.33A×12V/bridge. Features • Power save function. • ø1, ø2 direction inputs are used to make drive

文件：68.83 Kbytes 页数：4 Pages

SANYO

三洋