EEPROM-SPI

The FT25C08A is 8192 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 1024 words of 8 bits (1 byte) each. The devices are fabricated with proprietary advanced CMOS process for low power and low voltage applications. These devices a Serial Peripheral Interface (SPI) Compatible\nSupports SPI Modes 0 (0,0) and 3 (1,1)\n        Data Sheet Describes Mode 0 Operation\nLow voltage and low power operations\n        FT25C08A  VCC = 1.8V to 5.5V\n20MHz clock rate (5V)\nMaximum Standby current < 1µA (typically 0.02µA and 0.06µA @ 1.8V an;

FMD

辉芒微电子

8K-BIT/16K-BIT SPI SERIAL ELECTRICALLY ERASABLE PROM

DESCRIPTION The IS25C08 and IS25C16 are electrically erasable PROM devices that use the Serial Peripheral Interface (SPI) for communications. The IS25C08 is 8Kbit (1024x 8) and the IS25C16 is 16Kbit (2048 x 8). The IS25C08/16 EEPROMs are offered in a wide operating voltage range of 1.8V to 5.5V c

文件：87.48 Kbytes 页数：14 Pages

ISSI

矽成半导体

8K-BIT SPI SERIAL ELECTRICALLY ERASABLE PROM

DESCRIPTION The IS25C08B is an 8Kbit (1024x 8) electrically erasable PROM devices that use the Serial Peripheral Interface (SPI) for communications. This EEPROM operates in a wide voltage range of 1.8V to 5.5V to be compatible with most application voltages. ISSI designed this device to be a pra

文件：754.08 Kbytes 页数：17 Pages

ISSI

矽成半导体

8 Kbit Serial I2C Bus EEPROM with User-Defined Block Write Protection

DESCRIPTION This specification covers a range of 8 Kbits I2C bus EEPROM products, the ST24/25C08 and the ST24/25W08. In the text, products are referred to as ST24/25x08, where x is: C for Standard version and W for Hardware Write Control version.

文件：153.51 Kbytes 页数：15 Pages

SYC