USB UART IC

The FT232BQ is the 5 x5 mm lead free QFN32 package version of the 2nd generation of FTDI’s popular USB UART I.C. This device not only adds extra functionality to its FT8U232AM predecessor and reduces external component count, but also maintains a high degree of pin compatibility with the original,

文件：1.16455 Mbytes 页数：34 Pages

FTDI

飞特帝亚

USB UART IC

The FT232BL is the lead free version of the 2nd generation of FTDI’s popular USB UART I.C. This device not only adds extra functionality to its FT8U232AM predecessor and reduces external component count, but also maintains a high degree of pin compatibility with the original, making it easy to upg

文件：1.16455 Mbytes 页数：34 Pages

FTDI

飞特帝亚

USB UART IC

The FT232BQ is the 5 x5 mm lead free QFN32 package version of the 2nd generation of FTDI’s popular USB UART I.C. This device not only adds extra functionality to its FT8U232AM predecessor and reduces external component count, but also maintains a high degree of pin compatibility with the original,

文件：1.16455 Mbytes 页数：34 Pages

FTDI

飞特帝亚

FT232H Single Channel Hi-Speed USB to Multipurpose UART/FIFO IC

Introduction The UM232H is a USB-to-serial/FIFO development module in the FTDI product range which utilises the FT232H USB Hi-Speed (480Mb/s) single-port bridge chip to handle the USB signaling and protocols. The UM232H is ideal for development purposes to quickly prove functionality of adding

文件：1.82149 Mbytes 页数：65 Pages

FTDI

飞特帝亚

FT232H Single Channel Hi-Speed USB to Multipurpose UART/FIFO IC

The FT232H is a single channel USB 2.0 Hi Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces. The FT232H has the following advanced features: • Single channel USB to serial / parallel ports with a variety of c

文件：1.84017 Mbytes 页数：65 Pages

FTDI

飞特帝亚

FT232H Single Channel Hi-Speed USB to Multipurpose UART/FIFO IC

Introduction The UM232H is a USB-to-serial/FIFO development module in the FTDI product range which utilises the FT232H USB Hi-Speed (480Mb/s) single-port bridge chip to handle the USB signaling and protocols. The UM232H is ideal for development purposes to quickly prove functionality of adding

文件：1.82149 Mbytes 页数：65 Pages

FTDI

飞特帝亚

Incorporating Clock Generator Output and FTDIChip-ID Security Dongle

Features Hardware Features • Single chip USB to asynchronous serial data transfer interface. • Entire USB protocol handled on the chip - No USB-specific firmware programming required. • UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity. •

文件：795.74 Kbytes 页数：29 Pages

FTDI

飞特帝亚

Incorporating Clock Generator Output and FTDIChip-ID Security Dongle

Features Hardware Features • Single chip USB to asynchronous serial data transfer interface. • Entire USB protocol handled on the chip - No USB-specific firmware programming required. • UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity. •

文件：795.74 Kbytes 页数：29 Pages

FTDI

飞特帝亚

USB UART IC

Features Hardware Features • Single chip USB to asynchronous serial data transfer interface. • Entire USB protocol handled on the chip - No USB-specific firmware programming required. • UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity. •

文件：832.77 Kbytes 页数：47 Pages

FTDI

飞特帝亚

USB UART IC

• Single chip USB to asynchronous serial data transfer interface. • Entire USB protocol handled on the chip. No USB specific firmware programming required. • Fully integrated 1024-bit EEPROM storing device descriptors and CBUS I/O configuration. • Fully integrated USB termination resistors. •

文件：1.34393 Mbytes 页数：40 Pages

FTDI

飞特帝亚