18V, 5A, High Efficiency Synchronous Step-Down Converter in DFN2x2-6

ETA1656 is a wide input range, high efficiency and high frequency DC to DC step-down switching regulator, capable of delivering up to 5A of output current. It adopts an Adaptive COT control scheme that enables very fast transient response and provides a very smooth transition when the output varies • Wide Input Range: 4.5V-18V\n\n• Adaptive COT Control\n\n• Ultra-Fast Load Transient Response\n\n• High Efficiency PFM Mode at Light Load\n\n• Low Rdson Internal Power FETs\n\n• Capable of Delivering up to 5A\n\n• Thermal Shutdown and UVLO\n\n• Available in DFN2x2-6;

ETA

钰泰半导体

Surge Protected, Single Input, Dual Output Load Switch with OVP

Features • Single Input, Dual Output Low-RON Switch  VBUS to VOUT: 20mΩ typ  VBUS to SYS: 35mΩ typ  Reverse Blocking on Both Switch Paths • Wide Input Voltage Range: 2.7V – 13.2V  VBUS Abs Max: -6V to 28V • Surge Protected VBUS  IEC61000-4-5: > ±200V • ESD Protection  IEC61000-4-

文件：134.49 Kbytes 页数：2 Pages

KINETIC

芯凯电子

Surge Protected, Single Input, Dual Output Load Switch with OVP

Features • Single Input, Dual Output Low-RON Switch  VBUS to VOUT: 20mΩ typ  VBUS to SYS: 35mΩ typ  Reverse Blocking on Both Switch Paths • Wide Input Voltage Range: 2.7V – 13.2V  VBUS Abs Max: -6V to 28V • Surge Protected VBUS  IEC61000-4-5: > ±200V • ESD Protection  IEC61000-4-

文件：134.49 Kbytes 页数：2 Pages

KINETIC

芯凯电子

2-Phase Stepping Motor Driver

Overview The LB1656 is a dual bridge driver IC suited for use in 2-phase bipolar stepping motor driver for FDD (3 to 5.25 inches) head actuator. The maximum driver current×voltage is 0.33A×12V/bridge. Features • Power save function. • ø1, ø2 direction inputs are used to make drive

文件：68.83 Kbytes 页数：4 Pages

SANYO

三洋