6A Switch with RCB and Voltage Detector

The ET3155 advanced load management switches target applications requiring a highly integrated solution it disconnects loads powered from DC Power Rail (When LCE is low, IN port power on, ET3155 will check the voltage of the OUT pin with a 300Ω pull down resistor after 3ms. If OUT is lower than 1.0V • 2.5V to 6.0V Input Voltage Operating Range\n\n• Typical RDS(on):\n--5mΩ at VIN=4.5V\n--6mΩ at VIN=3.3V\n--10mΩ at VIN=3.0V\n\n• Maximum Continuous Switch Current: 6A\n\n• True Reverse Current Blocking (TRCB)\n\n• Logic CMOS GPIO interface and related power supply requirement\n\n• ESD Protected: Ab;

ETEK

力芯微

OUTLINE, DUAL DIRECTIONAL COUPLER

文件：71.11 Kbytes 页数：1 Pages

IPP

짹16.5kV ESD (IEC61000-4-2) Protected, Large Output Swing, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers

文件：896.94 Kbytes 页数：20 Pages

INTERSIL

짹16.5kV ESD, Large Output Swing, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers

文件：948.34 Kbytes 页数：22 Pages

INTERSIL