带SD功能高压600V2A半桥驱动芯片

EG2130 是一款高性价比的带 SD 功能的 MOS 管、IGBT 管栅极驱动专用芯片，内部集成了逻辑信号输入处理电路、死区时控制电路、电平位移电路、脉冲滤波电路及输出驱动电路，专用于无刷电机控制器、电源 DC - DC 中的驱动电路。高端工作电压可达 600V，低端 Vcc 的电源电压范围宽 2.8V - 20V，静态功耗小于 1uA。该芯片输入通道 IN 内建了一个 200K 下拉电阻，SD 内建了一个 200K 下拉电阻，在输入悬空时使上、下功率 MOS 管处于关闭状态，输出电流能力为 I0+/-2/2.5A，采用 SOP8 封装。 • 高端悬浮自举电源设计，耐压可达 600V\n• 适应 5V、3.3V 输入电压\n• 最高频率支持 500KHZ\n• 低端 VCC 电压范围 2.8V - 20V\n• 输出电流能力 IO+/- 2A/2.5A\n• 内建死区控制电路\n• SD 输入通道低电平有效，关闭 HO、LO 输出\n• 外围器件少\n• 静态电流小于 1uA，非常适合电池场合\n• 封装形式：SOP - 8;

EGmicro

屹晶微电子

MOS diode drive chip

文件：670.16 Kbytes 页数：12 Pages

EGMICRO

屹晶微电子

85MHz Current Feedback Amplifier

The EL2130 is a wideband current mode feedback amplifier optimized for gains between -10 and +10 while operating on ±5V power supplies. Built using Elantecs Complementary Bipolar process, this device exhibits -3dB bandwidths in excess of 85MHz at unity gain and 75MHz at a gain of two. The EL2130 i

文件：205.69 Kbytes 页数：7 Pages

Intersil

85 MHz Current Feedback Amplifier

General Description The EL2130 is a wideband current mode feedback amplifier optimized for gains between b10 and a10 while operating on g5V power supplies. Built using Elantec’s Complementary Bipolar process, this device exhibits b3 dB bandwidths in excess of 85 MHz at unity gain and 75 MHz at a

文件：230.06 Kbytes 页数：8 Pages

Elantec

85 MHz Current Feedback Amplifier

General Description The EL2130 is a wideband current mode feedback amplifier optimized for gains between b10 and a10 while operating on g5V power supplies. Built using Elantec’s Complementary Bipolar process, this device exhibits b3 dB bandwidths in excess of 85 MHz at unity gain and 75 MHz at a

文件：230.06 Kbytes 页数：8 Pages

Elantec