Magnetic Shield Cases

Photomultiplier tubes are extremely sensitive to magnetic fields and exhibit output variations even from sources such as terrestrial magnetism. Hamamatsu E989 series magnetic shield cases are designed specifically to protect photomultiplier tubes from the influence of such magnetic fields. The E9

文件：88.28 Kbytes 页数：1 Pages

HAMAMATSUHamamatsu Photonics Co.,Ltd.

滨松光子滨松光子学株式会社

Magnetic Shield Cases

Photomultiplier tubes are extremely sensitive to magnetic fields and exhibit output variations even from sources such as terrestrial magnetism. Hamamatsu E989 series magnetic shield cases are designed specifically to protect photomultiplier tubes from the influence of such magnetic fields. The E9

文件：88.28 Kbytes 页数：1 Pages

HAMAMATSUHamamatsu Photonics Co.,Ltd.

滨松光子滨松光子学株式会社

Autonomous MAC and individual physical address

文件：2.44366 Mbytes 页数：51 Pages

ELMOS

Two independent operating channels

文件：533.96 Kbytes 页数：46 Pages

ELMOS

Four independent operating channels

文件：557.02 Kbytes 页数：47 Pages

ELMOS

BASIC IO-LINK TRANSCEIVER

文件：881.67 Kbytes 页数：19 Pages

ELMOS

Autonomous MAC and individual physical address

文件：2.44366 Mbytes 页数：51 Pages

ELMOS

2-Channel Sensor Interface PSI5

The E981.07 manages the connection and communication between a microcontroller unit (MCU) and up to six sensor satellites. It can be applied for example in a vehicle passenger restraint system. The device provides two... read more • Two respective, four independent operating channels\n•  Device parameters comply with PSI5-P10P-500/3L (PSI5 spec 1.3)\n•  Applicable for parallel and universal mode (standard) as well as daisy chain mode (increased)\n•  Channel output short circuit protected against 40V and GND;

Elmos

艾尔默斯

4-Channel Sensor Interface PSI5

The E981.08 manages the connection and communication between a microcontroller unit (MCU) and up to twelve sensor satellites. It can be applied for example in a vehicle passenger restraint system. The device provides four... read more •     Four independent operating channels\n•     Applicable for parallel and universal mode (standard) as well as daisy chain mode (increased)\n•     Channel output short circuit protected against 40V and GND;

Elmos

艾尔默斯

Basic IO-Link® Transceiver

The IC is intended to be used as transceiver in IO-Link® and SIO-mode applications in sensors and actuator devices. The communication and the power supply work across 3 separate lines to the IO-Link® Master. The integrated voltage regulator is able to provide 5V for external purposes. The E981.10 is ·Integrated 5V voltage regulator\n·Wake-up detection\n·Driver capability up to 200mA\n·C/Q reverse polarity protection\n·3.3V/5V compatible digital interface\n·Baud rate selection up to 230.4kBaud\n·Load current monitor and over current protection\n·Over temperature protection;

Elmos

艾尔默斯