E2A

SURFACE MOUNT SUPERFAST RECTIFIER VOLTAGE - 50 to 600 Volts CURRENT - 2.0 Ampere

E2A

2.0AMP SURFACE MOUNT GLASS SUPERFAST RECOVERY RECTIFIER

E2A

Cylindrical Proximity Sensor

E2A

Cylindrical Proximity Sensor

E2A

Super Fast Recovery Rectifier;

E2A

包装：散装 类别：五金件，紧固件，配件 其它 描述：FLANGED CAP - COMPATIBLE UNF THR

E2AF

丝印：E2AF；Package：SMAF；Surface Mount Super Fast Recovery Rectifier E2AF Through E2KF

Features Lowprofilepackage Idealforautomatedplacement Glasspassivatedchipjunction Highforwardsurgecapability SuperFastreverserecoverytime MeetsMSLlevel1,perJ-STD-020,LFmaximumpeak of260°C

E2A-M08KN04-M1-B1 OMC

E2A-M08KN04-M1-B1 OMC - Inductive Proximity Sensor, Cylindrical, E2A Series, M8, 4 mm, PNP-NO, 12 V to 24 V, Connector; ·Standard, M8, short barrel, non-shielded sensor\n·Cylindrical, metric threaded, brass housing\n·Sensing distance is 4mm\n·M12 connector (4 pole) connection\n·DC power source, 3 wire, PNP open collector output\n·Operating mode is normally open (NO)\n·Power supply voltage range from 12VDC to 24VDC\n·Yellow LED for indication\n·Insulation resistance is 50Mohm min at 500VDC, dielectric strength is 1000VAC at 50/60Hz\n·Approved by IEC60529, EN60947-5-2 standards, water resistance IP67\n;

The E2A-M08KN04-M1-B1 OMC from Omron Industrial Automation is an E2A series cylindrical proximity sensor. It has a safe mounting with greater sensing distance approximately 1.5 to 2 times larger than that of any conventional Omron sensor. This cylindrical proximity sensor uses high-frequency oscillations. It resists heat, chemicals and water better than rectangular sensors.

E2A-M12KN08-WP-C1 2M

E2A-M12KN08-WP-C1 2M - Inductive Proximity Sensor, Cylindrical, E2A Series, M12, 8 mm, NPN-NO, 12 V to 24 V, Pre-wired; ·Standard, M12, short barrel, non-shielded sensor\n·Cylindrical, metric threaded, brass housing\n·Sensing distance is 8mm\n·Pre wired, PVC connection\n·DC power source, 3 wire, NPN open collector output\n·Operating mode is normally open (NO)\n·Power supply voltage range from 12VDC to 24VDC\n·Yellow LED for indication, 2m cable length\n·Insulation resistance is 50Mohm min at 500VDC, dielectric strength is 1000VAC at 50/60Hz\n·Approved by IEC60529, EN60947-5-2 standards, water resistance IP67\n;

The E2A-M12KN08-WP-C1 2M from Omron Industrial Automation is an E2A series cylindrical proximity sensor. It has a safe mounting with greater sensing distance approximately 1.5 to 2 times larger than that of any conventional Omron sensor. This cylindrical proximity sensor uses high-frequency oscillations. It resists heat, chemicals and water better than rectangular sensors.

E2AB

SURFACE MOUNT SUPERFAST RECOVERY RECTIFIER