E2A-S08LS02-M1-B1 OMC

E2A-S08LS02-M1-B1 OMC - Inductive Proximity Sensor, Cylindrical, E2A Series, M8, 2 mm, PNP-NO, 12 V to 24 V, Connector; ·Standard, M8, long barrel, shielded sensor\n·Cylindrical, metric threaded, stainless steel housing\n·Sensing distance is 2mm\n·M12 connector (4 pole) connection\n·DC power source, 3 wire, PNP open collector output\n·Operating mode is normally open (NO)\n·Power supply voltage range from 12VDC to 24VDC\n·Yellow LED for indication\n·Insulation resistance is 50Mohm min at 500VDC, dielectric strength is 1000VAC at 50/60Hz\n·Approved by IEC60529, EN60947-5-2 standards, water resistance IP67\n;

The E2A-S08LS02-M1-B1 OMC from Omron Industrial Automation is an E2A series cylindrical proximity sensor. It has a safe mounting with greater sensing distance approximately 1.5 to 2 times larger than that of any conventional Omron sensor. This cylindrical proximity sensor uses high-frequency oscillations. It resists heat, chemicals and water better than rectangular sensors.

E2A-S08LS02-M1-B1

CylindricalProximitySensor

E2A-S08LS02-M1-B1

CylindricalProximitySensor