Real-Time Clock/calendar in binary format RTC iButton Over 10 years of operation

iButton DESCRIPTION The DS1904 RTC iButton is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially via the 1-Wire protocol, which requires only a single data lead and a ground return. The DS1904 contains a unique 64-bit factory-lasered ROM and a

文件：139.3 Kbytes 页数：12 Pages

Maxim

美信

RTC iButton

Special Features •Real-time clock/calendar in binary format •Uses the same binary time/daterepresentation as the DS1994 but with1 second resolution •Clock accuracy is better than ±2 minutes permonth at +25°C •Operating temperature range from -40°C to+85°C •Over 10 years of operation Common

文件：440.27 Kbytes 页数：13 Pages

AD

亚德诺

Serial Number iButton

General Description The DS1990A serial number iButton® is a rugged data carrier that serves as an electronic registration number for automatic identification. Data is transferred serially through the 1-Wire® protocol, which requires only a single data lead and a ground return. Every DS1990A h

文件：702.16 Kbytes 页数：10 Pages

AD

亚德诺

RTC iButton

iButton DESCRIPTION The DS1904 RTC iButton is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially via the 1-Wire protocol, which requires only a single data lead and a ground return. The DS1904 contains a unique 64-bit factory-lasered ROM and a

文件：72.93 Kbytes 页数：12 Pages

Dallas

Temperature iButton

iButton DESCRIPTION The DS1920 Temperature iButton provides 9-bit temperature readings which indicate the temperature of the device. Information is sent to/from the DS1920 over a 1-Wire interface. Power for reading, writing, and performing temperature conversions is derived from the data line

文件：729.1 Kbytes 页数：22 Pages

Dallas

Hygrochron Temperature/Humidity Logger

文件：649.39 Kbytes 页数：55 Pages

Maxim

美信

based iButtons branded with their respective character for optimum legibility

文件：56.73 Kbytes 页数：2 Pages

Maxim

美信

iButton??Adhesive Pads

文件：129.87 Kbytes 页数：2 Pages

Maxim

美信

Logs Up to 2048 Consecutive Temperature Thermochron iButton

文件：675.51 Kbytes 页数：42 Pages

Maxim

美信

iButton 粘合垫

DS9096P由白色双面丙烯酸VHB™泡沫胶带（3M部件号4932）制成，经过模切以匹配iButton®器件的直径。借助这些垫，iButton几乎可以固定在任何光滑的表面上。DS9096P具有出色的长期保持力，适用于许多内部和外部工业应用。\n\n DS9096P在低表面能量基材上效果出众，包括大多数金属、密封木材和玻璃，以及许多塑料、复合材料和涂漆表面。多孔（例如混凝土）或纤维材料（例如木材）需要密封以提供统一的表面。铜、黄铜、增塑乙烯基等材料可能需要涂底漆或涂层，以防止粘合剂和基材之间的相互作用。要在高湿度环境下粘合到玻璃、瓷砖或其他亲水表面，可能需要使用硅烷偶联剂以帮助确保长期 • iButton的低成本永久固定方法\n\n• 轻松将iButton固定到任何光滑平坦的表面\n\n• 可提供500个/卷的模切卷，芯内径为76mm（3英寸）\n\n• 在户外耐候测试和风化仪测试中具有出色的抗紫外线性能\n\n• 21°C和50%相对湿度下的保质期为24个月\n\n• 适宜应用温度：21°C至38°C；最低应用温度：10°C；最高长期温度：71°C;

ADI

亚德诺