Micro-Centigrade Temperature Sensor

DESCRIPTION The DS60 Micro-Centigrade Temperature Sensor is a factory-calibrated voltage output Centigrade temperature sensor. The thermometer output has a typical sensitivity of +6.25mV/°C and a DC offset of +424 mV. The measurement range is -40°C to +125°C, corresponding to a typical output ran

文件：56.24 Kbytes 页数：4 Pages

Dallas

power LED

Introduction LUXEON® K2 with TFFC is the most robust and powerful LED available offering the lowest cost of light with the widest operating range of any power LED. LUXEON K2 with TFFC ♦ delivers more useable light ♦ optimizes applications to reduce size and cost ♦ enables more robust applicat

文件：655.42 Kbytes 页数：26 Pages

LUMILEDS

Analog Temperature Sensor

文件：58.14 Kbytes 页数：2 Pages

Maxim

美信

0.5 Accurate Analog-Output Temperature Sensor

GENERAL DESCRIPTION The DS600 is a ±0.5°C accurate analog-output temperature sensor. This accuracy is valid over its entire operating voltage range of 2.7V to 5.5V and the wide temperature range of -20°C to +100°C. The DS600 can also act as a thermostat, with user-programmable trip points. A shut

文件：73.08 Kbytes 页数：4 Pages

Maxim

美信

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 1000A

Features Linearity error maximum 1 ppm Fluxgate, closed loop compensated technology with fixed excitation frequency and second harmonic zero flux detection for best in class accuracy and stability Industry standard DSUB 9 pin connection Green diode for normal operation indication Full alum

文件：486.56 Kbytes 页数：8 Pages

DANISENSE

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 1000A

Features Linearity error maximum 1 ppm Fluxgate, closed loop compensated technology with fixed excitation frequency and second harmonic zero flux detection for best in class accuracy and stability 100 turns calibration winding available in DSUB 9 connector - For up to ±50A test (apply ±500m

文件：499.61 Kbytes 页数：8 Pages

DANISENSE

0.5 Accurate Analog-Output Temperature Sensor

GENERAL DESCRIPTION The DS600 is a ±0.5°C accurate analog-output temperature sensor. This accuracy is valid over its entire operating voltage range of 2.7V to 5.5V and the wide temperature range of -20°C to +100°C. The DS600 can also act as a thermostat, with user-programmable trip points. A shut

文件：73.08 Kbytes 页数：4 Pages

Maxim

美信

0.5 Accurate Analog-Output Temperature Sensor

GENERAL DESCRIPTION The DS600 is a ±0.5°C accurate analog-output temperature sensor. This accuracy is valid over its entire operating voltage range of 2.7V to 5.5V and the wide temperature range of -20°C to +100°C. The DS600 can also act as a thermostat, with user-programmable trip points. A shut

文件：73.08 Kbytes 页数：4 Pages

Maxim

美信

0.5 Accurate Analog-Output Temperature Sensor

GENERAL DESCRIPTION The DS600 is a ±0.5°C accurate analog-output temperature sensor. This accuracy is valid over its entire operating voltage range of 2.7V to 5.5V and the wide temperature range of -20°C to +100°C. The DS600 can also act as a thermostat, with user-programmable trip points. A shut

文件：73.08 Kbytes 页数：4 Pages

Maxim

美信

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 660A

Features Linearity error maximum ±46 ppm 10V BNC output connection Fluxgate, closed loop compensated technology with fixed excitation frequency and second harmonic zero flux detection for best in class accuracy and stability Industry standard DSUB 9 pin connection Green diode for normal op

文件：558.94 Kbytes 页数：8 Pages

DANISENSE