Serial Port iButton Holder

DESCRIPTION The DS1411 is a sophisticated RS232 to 1-Wire TM adapter and iButton holder which performs RS232 level conversion and actively generates the 1-Wire communication signals. Together with an adequate TMEX software driver it enables an IBM-compatible PC or laptop computer to directly read

文件：50.27 Kbytes 页数：1 Pages

DALLAS

Serial Port iButton Holder

DESCRIPTION The DS1411 is a sophisticated RS232 to 1-Wire TM adapter and iButton holder which performs RS232 level conversion and actively generates the 1-Wire communication signals. Together with an adequate TMEX software driver it enables an IBM-compatible PC or laptop computer to directly read

文件：50.27 Kbytes 页数：1 Pages

DALLAS

1-Wire Network Cables

BENEFITS AND FEATURES  Coiled Cables Provide Flexible Connection to Connect iButtons® and Capsule Products to 1-Wire® Networks  Convenient, Off-the-Shelf Connectivity  Multiple Connectors Maximize Battery Life Momentary Contact Dwelled Contact Touch and Hold  Optional Adhesive Pad Sim

文件：266.82 Kbytes 页数：3 Pages

MAXIM

美信

Passive Serial Port iButton Holder

DESCRIPTION The DS1413 Passive Serial Port iButton Holder is a simple, lowcost adapter which performs RS232C (±12V) level conversion, allowing a non-EPROM iButton to be read and written directly. It can also read all EPROM based iButtons. The serial port must support a data transmission rate of

文件：115.21 Kbytes 页数：1 Pages

DALLAS

Multi iButton

DESCRIPTION Authorization iButtons are sophisticated microelectronics, sealed into miniature stainless steel cans, creating a low cost, portable medium for storing and controlling access to sensitive information. iButtons are used with port adapters as a hardware based protection system for

文件：19.14 Kbytes 页数：2 Pages

DALLAS

Time iButton

DESCRIPTION Authorization iButtons are sophisticated microelectronics, sealed into miniature stainless steel cans, creating a low cost, portable medium for storing and controlling access to sensitive information. iButtons are used with port adapters as a hardware based protection system for soft

文件：19.44 Kbytes 页数：2 Pages

DALLAS

Real-Time Clock with NV RAM Control Control

FEATURES Direct Replacement for IBM AT Computer Clock/Calendar Functionally Compatible with the DS1285/DS1287 Available as Chip (DS14285, DS14285S, or DS14285Q) or Stand-Alone Module with Embedded Lithium Battery and Crystal (DS14287) Automatic Backup Supply and Write Protection to Make

文件：550.29 Kbytes 页数：26 Pages

SYC

1.Wire Bus Master with Overdrive

DESCRIPTION The DS1481 is a dedicated 1–wire timing generator. The device is normally used in conjunction with a parallel port controller to provide the necessary interface to the host processor. FEATURES • Provides a synchronous interface to Dallas Semicon ductor 1–wire devices • Compatible

文件：69.98 Kbytes 页数：10 Pages

DALLAS

1-Wire Bus Master with Overdrive

DESCRIPTION The DS1481 is a dedicated 1–wire timing generator. The device is normally used in conjunction with a parallel port controller to provide the necessary interface to the host processor. FEATURES • Provides a synchronous interface to Dallas Semicon ductor 1–wire devices • Compatible

文件：69.98 Kbytes 页数：10 Pages

DALLAS

1-Wire Level Shifter and Line Driver with Load Sensor

DESCRIPTION The DS1482 is a simple 1-Wire line driver with load sensor and level shifter, designed to function as an interface between a 3V host system and a 1-Wire system that runs on 5V. Two supplies are provided, a 5V supply for the 1-Wire operations (VCC) and an interface supply (VCCQ). The D

文件：215.44 Kbytes 页数：7 Pages

DALLAS