DRV8410 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.01884 Mbytes 页数：45 Pages

TI

德州仪器

DRV8411 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 400 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.03405 Mbytes 页数：45 Pages

TI

德州仪器

DRV8411 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 400 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.9544 Mbytes 页数：54 Pages

TI

德州仪器

DRV8410 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.94295 Mbytes 页数：54 Pages

TI

德州仪器

DRV8410 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.7716 Mbytes 页数：61 Pages

TI

德州仪器

DRV8411A Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 400 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.53544 Mbytes 页数：53 Pages

TI

德州仪器

DRV8847 Dual H-Bridge Motor Driver

1 Features • Dual H-bridge motor driver – Single or dual-brushed DC motors – One bipolar stepper motor – Solenoid loads • 2.7-V to 18-V operating voltage range • High output current per H-bridge – 1-A RMS driver current at TA = 25°C – 2-A RMS driver current in parallel mode at TA = 25°C

文件：3.55639 Mbytes 页数：89 Pages

TI

德州仪器

DRV8847 Dual H-Bridge Motor Driver

1 Features • Dual H-bridge motor driver – Single or dual-brushed DC motors – One bipolar stepper motor – Solenoid loads • 2.7-V to 18-V operating voltage range • High output current per H-bridge – 1-A RMS driver current at TA = 25°C – 2-A RMS driver current in parallel mode at TA = 25°C

文件：3.41222 Mbytes 页数：86 Pages

TI

德州仪器

Dual H-Bridge Motor Driver

文件：759.37 Kbytes 页数：55 Pages

TI

德州仪器

Dual H-Bridge Motor Driver

文件：2.56862 Mbytes 页数：67 Pages

TI

德州仪器