DRV81602-Q1: 8-Channel Configurable Low-side and High-side Driver for Automotive Relay, LED, Lighting and Motor Control

1 Features • 3V to 40V Analog supply voltage – Cranking capability down to 3V – Supports LV124 standard • 3V to 5.5V Digital supply voltage – Compatible with 3.3V and 5V microcontrollers • 44V minimum drain to source clamping voltage • -19V maximum source to ground clamping voltage • RDS(O

文件：2.20687 Mbytes 页数：54 Pages

TI

德州仪器

DRV81080-Q1: 8-Channel, 40V, 700mΩ, Fully Protected High-side Driver for Automotive LED, Lighting and Motor Control

1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation to aid functional safety design • 3V to 40V Analog supply voltage – Cranking capability down to 3V – Supports LV124 automotive standard • 3V to

文件：2.21868 Mbytes 页数：60 Pages

TI

德州仪器

DRV81620-Q1: 8-Channel, 40V, 700mΩ, Fully Protected, Configurable Low-side and High-side Driver for Automotive Relay, LED, Lighting and Motor Control

1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation to aid functional safety design • 3V to 40V Analog supply voltage – Cranking capability down to 3V – Supports LV124 automotive standard • 3V to

文件：2.30279 Mbytes 页数：63 Pages

TI

德州仪器

DRV81242-Q1: 8-Channel, 40V, 700mΩ, Fully Protected, Configurable Low-side and High-side Driver for Automotive Relay, LED, Lighting and Motor Control

1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation to aid functional safety design • 3V to 40V Analog supply voltage – Cranking capability down to 3V – Supports LV124 automotive standard • 3V to

文件：2.3046 Mbytes 页数：61 Pages

TI

德州仪器

汽车级、40V、2 通道可配置、4 通道高侧、2 通道低侧驱动器

The DRV81242-Q1 is an 8-channel low and high-side driver with protection and diagnostics. The device is designed to control relays, LEDs, lamps and motors.\n\nA serial peripheral interface (SPI) with daisy chain is utilized for control and diagnosis of the loads and the device. Two input pins with m AEC-Q100 qualified for automotive applications \n \nTemperature grade 1: –40°C to +125°C, TA\n \n\n \nFunctional Safety-Capable \n \nDocumentation to aid functional safety design\n \n\n \n3V to 40V Analog supply voltage \n \nCranking capability down to 3V\n \nSupports LV124 automotive standard\n \n\;

TI

德州仪器