DRV81602-Q1: 8-Channel Configurable Low-side and High-side Driver for Automotive Relay, LED, Lighting and Motor Control

1 Features • 3V to 40V Analog supply voltage – Cranking capability down to 3V – Supports LV124 standard • 3V to 5.5V Digital supply voltage – Compatible with 3.3V and 5V microcontrollers • 44V minimum drain to source clamping voltage • -19V maximum source to ground clamping voltage • RDS(O

文件：2.20687 Mbytes 页数：54 Pages

TI

德州仪器

DRV81242-Q1: 8-Channel, 40V, 700mΩ, Fully Protected, Configurable Low-side and High-side Driver for Automotive Relay, LED, Lighting and Motor Control

1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation to aid functional safety design • 3V to 40V Analog supply voltage – Cranking capability down to 3V – Supports LV124 automotive standard • 3V to

文件：2.3046 Mbytes 页数：61 Pages

TI

德州仪器

DRV81620-Q1: 8-Channel, 40V, 700mΩ, Fully Protected, Configurable Low-side and High-side Driver for Automotive Relay, LED, Lighting and Motor Control

1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation to aid functional safety design • 3V to 40V Analog supply voltage – Cranking capability down to 3V – Supports LV124 automotive standard • 3V to

文件：2.30279 Mbytes 页数：63 Pages

TI

德州仪器

DRV81080-Q1: 8-Channel, 40V, 700mΩ, Fully Protected High-side Driver for Automotive LED, Lighting and Motor Control

1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation to aid functional safety design • 3V to 40V Analog supply voltage – Cranking capability down to 3V – Supports LV124 automotive standard • 3V to

文件：2.21868 Mbytes 页数：60 Pages

TI

德州仪器

具有跛行回家功能的汽车级 40V、330mA/通道 8 通道高侧驱动器

DRV81080-Q1 是一款具有集成保护和诊断功能的八通道高侧开关。它可用于控制汽车和工业应用中的继电器、LED、灯和电机。\n\n具有菊花链功能的串行外设接口 (SPI) 可用于控制和诊断负载以及器件。两个带有映射功能的输入引脚可用于对输出进行直接控制。该器件支持使用跛行回家模式激活失效防护。集成式 PWM 发生器可驱动 LED，而灯泡浪涌模式可驱动大电容负载。\n\nDRV81080-Q1 支持各种保护特性，例如欠压、过压、短路和开路负载检测。DRV81080-Q1 具有高度集成以及嵌入式保护和诊断功能，因此非常适合汽车车身和动力总成应用。 3V 至 40V 模拟电源电压 \n \n 启动时电压可低至 3V\n \n 支持 LV124 标准\n \n\n \n 3V 至 5.5V 数字电源电压 \n \n 与 3.3V 和 5V 微控制器兼容\n \n\n \n 最大源极至地钳位电压为 -19V\n \n两个独立的电池馈电（VM1、VM2） \n \n每个引脚都是四个高侧通道的漏极\n \n\n \nRDS(ON)：12V、25°C 时的典型值为 630mΩ\n \n电流：85°C 时每个输出为 330mA（所有通道都开启）\n \n两个并行输入带有映射功能\n \n跛行回家模式下激活失效防护 \n \n使用 nSLEEP 和 I;

TI

德州仪器