DLPC7530 High-Resolution Controller

1 Features • DLPC7530 controller using the DLP472NE and DLP651NE digital micromirror device (DMD) supports – Up to 1080p at up to 240Hz (2D) and 120Hz (3D) • Provides single V-by-One® HS video input port with one, two, four, or eight lanes – Up to 600MHz pixel clock support – Up to 3.0Gbp

文件：2.40772 Mbytes 页数：112 Pages

TI

德州仪器

适用于 1080p DMD 的 DLP(R) 显示控制器

The DLPC7530 is a digital display controller for the 1080p display chipsets, which comprises the DLPC7530 display controller, the DLP472NE and DLP651NE digital micromirror devices (DMD), and the DLPA100 power and motor driver. This solution targets display systems that require lower cost high resolu DLPC7530 controller using the DLP472NE and DLP651NE digital micromirror device (DMD) supports \n \nUp to 1080p at up to 240Hz (2D) and 120Hz (3D)\n \n\n \nProvides single V-by-One HS video input port with one, two, four, or eight lanes \n \nUp to 600MHz pixel clock support\n \nUp to 3.0Gbps input tr;

TI

德州仪器

DLPC7530 High-Resolution Controller

1 Features • DLPC7530 controller using the DLP472NE and DLP651NE digital micromirror device (DMD) supports – Up to 1080p at up to 240Hz (2D) and 120Hz (3D) • Provides single V-by-One® HS video input port with one, two, four, or eight lanes – Up to 600MHz pixel clock support – Up to 3.0Gbp

文件：2.40772 Mbytes 页数：112 Pages

TI

德州仪器

DLPC7530 High-Resolution Controller

1 Features • DLPC7530 controller using the DLP472NE and DLP651NE digital micromirror device (DMD) supports – Up to 1080p at up to 240Hz (2D) and 120Hz (3D) • Provides single V-by-One® HS video input port with one, two, four, or eight lanes – Up to 600MHz pixel clock support – Up to 3.0Gbp

文件：2.40772 Mbytes 页数：112 Pages

TI

德州仪器

UXM Wireless Test Set

文件：1.2407 Mbytes 页数：10 Pages

KEYSIGHT

是德科技

Monolithic 600mA Step-Down Regulator with Low Quiescent Current

The EL7530 is a synchronous, integrated FET 600mA stepdown regulator with internal compensation. It operates with an input voltage range from 2.5V to 5.5V, which accommodates supplies of 3.3V, 5V, or a Li-Ion battery source. The output can be externally set from 0.8V to VIN with a resistive divide

文件：476.2 Kbytes 页数：11 Pages

Intersil