USB2.0双刀双掷高速开关

The DIO32220 is a low-power, dual SPDT2-port high-speed analog switch. It handles bi-directional signal flow optimized for switching a high-speed (480 Mbps) source or a full-speed (12 Mbps) source. \\nThe DIO32220 has a high channel-to-channel noise isolation and a low bit-to-bit skew which allows i • Super high bandwidth (-3 dB): 2.0 GHz \n• Low CON: 3 pF typical \n• Low power consumption: 1 μA maximum \n• Packaged in Green MSOP-10, \n• ±6 kV HBM ESD on all pins \n• Power-off/on protection on common ports \n D+/D- pins tolerance up to 5.5 V;

DIOO

帝奥微

Low Power , USB2.0 High-Speed Switch

The DIO3222A is a low power, dual SPDT 2-port high-speed analog switch. It handles bi-directional signal flow and is optimized for switching a hi-speed (480Mbps) source or a full-speed (12Mbps) source.\n\nDIO3222A has high channel-to-channel noise isolation and low bit-to-bit skew which allows it to • VCC operation at 2.7V to 4.3V\n• Low Ron: 6 Ohm Typical\n• Low ICCT : 15μA Maximum\n• -3dB Bandwidth: > 720MHz\n• DQFN-10; MSOP-10 and QFN-10\n• 2kV CDM ESD Rating\n• D+/D- Pins Tolerate up to 5.25V\n\n\n;

DIOO

帝奥微

Low Power , USB2.0 High-Speed Switch

The DIO3222B is a low power, dual SPDT 2-port high-speed analog switch. It handles bi-directional signal flow and is optimized for switching a high-speed (480Mbps) source.\n\nDIO3222B has high channel-to-channel noise isolation and low bit-to-bit skew which allows it to pass high-speed differential • Over-Voltage Tolerance (OVT)\n• Voltage Operation: 2.7V to 5.5V\n• Low On Resistance: 3.6Ωtyp at 3.0Vcc\n• High Off-Isolation\n• Low Crosstalk\n• Low Con: 5pF\n• Low power consumption\n• Wide -3dB Bandwidth\n• Low Distortion\n• Green Packaged: DQFN10\n• 2KV CDM ESD Rating;\n• 8kV HBM ESD Rating;

DIOO

帝奥微

LED BARGRAPH DISPLAY

文件：320.3 Kbytes 页数：5 Pages

FORYARD

复洋

Advanta-TM ADRO-TM - Enabled DSP System

文件：374.52 Kbytes 页数：21 Pages

GENNUM

根努姆

Pb-Free Plus Anneal Available as an Option

文件：656.18 Kbytes 页数：28 Pages

INTERSIL