DCR

M12-A Male Rear Mount PG9 Receptacle

DCR

CARBON FILM

DCR

Very fast charge/discharge ??High power density ??IEC 62391

DCR010505

微型 1W 隔离稳压直流/直流转换器; • 1000-Vrms Isolation (Operational)\n• UL1950 Recognized Component\n• 53 W/in3 (3.3W/cm3) Power Density\n• 10-Pin PDIP and 12-Pin SOP Packages\n• Device-to-Device Synchronization\n• Thermal Protection\n• 400-kHz Switching\n• 125 FITs at 55°C\n• ±10% Input Range\n• Short-Circuit Protected\n• 5-V, 12-V, and 24-V Inputs\n• 3.3-V and 5-V Outputs\n• High Efficiency;

The DCR01 family is a series of high-efficiency, input-isolated, output-regulated DC-DC converters. In addition to 1 W nominal, galvanically-isolated output power capability, this range of DC-DCs offer very low output noise, thermal protection, and high accuracy.\n\nThis combination of features and small size makes the DCR01 series of devices suitable for a wide range of applications, and is an easy-to-use solution in applications requiring signal path isolation.\n\n This product has operational isolation and is intended for signal isolation only. It must not be used as a part of a safety isolation circuit requiring reinforced isolation. See definitions in .

DCR011203

微型 1W 隔离稳压直流/直流转换器; • 1000-Vrms Isolation (Operational)\n• UL1950 Recognized Component\n• 53 W/in3 (3.3W/cm3) Power Density\n• 10-Pin PDIP and 12-Pin SOP Packages\n• Device-to-Device Synchronization\n• Thermal Protection\n• 400-kHz Switching\n• 125 FITs at 55°C\n• ±10% Input Range\n• Short-Circuit Protected\n• 5-V, 12-V, and 24-V Inputs\n• 3.3-V and 5-V Outputs\n• High Efficiency;

The DCR01 family is a series of high-efficiency, input-isolated, output-regulated DC-DC converters. In addition to 1 W nominal, galvanically-isolated output power capability, this range of DC-DCs offer very low output noise, thermal protection, and high accuracy.\n\nThis combination of features and small size makes the DCR01 series of devices suitable for a wide range of applications, and is an easy-to-use solution in applications requiring signal path isolation.\n\n This product has operational isolation and is intended for signal isolation only. It must not be used as a part of a safety isolation circuit requiring reinforced isolation. See definitions in .

DCR011205

微型 1W 隔离稳压直流/直流转换器; • 1000-Vrms Isolation (Operational)\n• UL1950 Recognized Component\n• 53 W/in3 (3.3W/cm3) Power Density\n• 10-Pin PDIP and 12-Pin SOP Packages\n• Device-to-Device Synchronization\n• Thermal Protection\n• 400-kHz Switching\n• 125 FITs at 55°C\n• ±10% Input Range\n• Short-Circuit Protected\n• 5-V, 12-V, and 24-V Inputs\n• 3.3-V and 5-V Outputs\n• High Efficiency;

The DCR01 family is a series of high-efficiency, input-isolated, output-regulated DC-DC converters. In addition to 1 W nominal, galvanically-isolated output power capability, this range of DC-DCs offer very low output noise, thermal protection, and high accuracy.\n\nThis combination of features and small size makes the DCR01 series of devices suitable for a wide range of applications, and is an easy-to-use solution in applications requiring signal path isolation.\n\n This product has operational isolation and is intended for signal isolation only. It must not be used as a part of a safety isolation circuit requiring reinforced isolation. See definitions in .

DCR0121SF64

Phase Control Thyristor Target Information

FEATURES ■DoubleSideCooling ■HighSurgeCapability ■LowInductanceInternalConstruction APPLICATIONS ■HighPowerConverters ■DCMotorControl ■HighVoltagePowerSupplies

DCR030

HIGH-PERFORMANCE FAN HEATER

>HighDCheatingperformance >Integratedthermostatorhygrostat (optional) >Smallhysteresis >Integratedswitchmodule >Screwfixing >Opticalindicator(LED)

DCR1002SF

Phase Control Thyristor

FEATURES ■DoubleSideCooling ■HighSurgeCapability ■LowTurn-onLosses APPLICATIONS ■HighPowerConverters ■HighVoltagePowerSupplies ■DCMotorControl

DCR1002SF10

Phase Control Thyristor

FEATURES ■DoubleSideCooling ■HighSurgeCapability ■LowTurn-onLosses APPLICATIONS ■HighPowerConverters ■HighVoltagePowerSupplies ■DCMotorControl