DAC104S085

具有轨至轨输出的 10 位微功耗 4 通道数模转换器 (DAC); • Qualified for Automotive Applications\n• AEC-Q100 Qualified With the Following Results: \n• Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature\n \n• Ensured Monotonicity\n• Low Power Operation\n• Rail-to-Rail Voltage Output\n• Power-On Reset to 0 V\n• Simultaneous Output Updating\n• Wide Power Supply Range (2.7 V to 5.5 V)\n• Key Specifications \n• Resolution: 10 bits\n• INL: ±2 LSB (Maximum)\n• DNL: +0.35 / –0.25 LSB (Maximum)\n• Settling Time: 6 µs (Maximum)\n• Zero Code Error: 15 mV (Maximum)\n• Full-Scale Error: –0.75% FS (Maximum)\n• Typical Supply Power \n• Normal Mode: 1.1 mW (3 V), 2.5 mW (5 V)\n• Power Down: 0.3 µW (3 V), 0.8µW (5 V);

The DAC104S085 device is a full-featured, general-purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC104S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC104S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.\n\nThe reference for the DAC104S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.\n\nA power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three different termination options.\n\nThe low power consumption and small packages of the DAC104S085 make it an excellent choice for use in battery-operated equipment.\n\nThe DAC104S085 is one of a family of pin-compatible DACs, including the 8-bit DAC084S085 and the 12-bit DAC124S085. The DAC104S085 operates over the extended industrial temperature range of –40°C to +125°C.

DAC104S085

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

DAC104S085

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

DAC104S085-Q1

具有轨至轨输出的汽车类 10 位微功耗 4 通道数模转换器 (DAC); • Qualified for Automotive Applications\n• AEC-Q100 Qualified With the Following Results: \n• Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature\n \n• Ensured Monotonicity\n• Low Power Operation\n• Rail-to-Rail Voltage Output\n• Power-On Reset to 0 V\n• Simultaneous Output Updating\n• Wide Power Supply Range (2.7 V to 5.5 V)\n• Key Specifications \n• Resolution: 10 bits\n• INL: ±2 LSB (Maximum)\n• DNL: +0.35 / –0.25 LSB (Maximum)\n• Settling Time: 6 µs (Maximum)\n• Zero Code Error: 15 mV (Maximum)\n• Full-Scale Error: –0.75% FS (Maximum)\n• Typical Supply Power \n• Normal Mode: 1.1 mW (3 V), 2.5 mW (5 V)\n• Power Down: 0.3 µW (3 V), 0.8µW (5 V);

The DAC104S085 device is a full-featured, general-purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC104S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC104S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.\n\nThe reference for the DAC104S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.\n\nA power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three different termination options.\n\nThe low power consumption and small packages of the DAC104S085 make it an excellent choice for use in battery-operated equipment.\n\nThe DAC104S085 is one of a family of pin-compatible DACs, including the 8-bit DAC084S085 and the 12-bit DAC124S085. The DAC104S085 operates over the extended industrial temperature range of –40°C to +125°C.

DAC104S085CIMM

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

DAC104S085CIMM

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

DAC104S085CIMM/NOPB

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

DAC104S085CIMMSLASHNOPB

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

DAC104S085CIMMX

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

DAC104S085CIMMX

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output