DAC084S085

具有轨到轨输出的 8 位微功耗四路数模转换器; • Ensured Monotonicity\n• Low-Power Operation\n• Rail-to-Rail Voltage Output\n• Power-On Reset to 0 V\n• Simultaneous Output Updating\n• Wide Power Supply Range (2.7 V to 5.5 V)\n• Industry’s Smallest Package\n• Power Down Modes\n• Key Specifications \n• Resolution: 8 Bits\n• INL: ±0.5 LSB (Maximum)\n• DNL: +0.18 / –0.13 LSB (Maximum)\n• Setting Time: 4.5 µs (Maximum)\n• Zero Code Error: +15 mV (Maximum)\n• Full-Scale Error: –0.75 %FS (Maximum)\n• Supply Power: \n• Normal: 1.1 mW (3 V) / 2.5 mW (5 V) Typical\n• Power Down: 0.3 µW (3 V) / 0.8 µW (5 V) Typical;

The DAC084S085 is a full-featured, general-purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC084S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC084S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.\n\nThe reference for the DAC084S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC084S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.\n\nA power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three different termination options.\n\nThe low-power consumption and small packages of the DAC084S085 make it an excellent choice for use in battery-operated equipment.\n\nThe DAC084S085 is one of a family of pin-compatible DACs, including the 10-bit DAC104S085 and the 12-bit DAC124S085. The DAC084S085 operates over the extended industrial temperature range of –40°C to +105°C.

DAC084S085

8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

DAC084S085

DAC084S085 8-Bit Micropower QUAD Digital-to-Analog Converter With Rail-to-Rail Output

DAC084S085_16

DAC084S085 8-Bit Micropower QUAD Digital-to-Analog Converter With Rail-to-Rail Output

DAC084S085CIMM

8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

DAC084S085CIMM

DAC084S085 8-Bit Micropower QUAD Digital-to-Analog Converter With Rail-to-Rail Output

DAC084S085CIMM/NOPB

DAC084S085 8-Bit Micropower QUAD Digital-to-Analog Converter With Rail-to-Rail Output

DAC084S085CIMMSLASHNOPB

DAC084S085 8-Bit Micropower QUAD Digital-to-Analog Converter With Rail-to-Rail Output

DAC084S085CIMMX

8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

DAC084S085CIMMX/NOPB

DAC084S085 8-Bit Micropower QUAD Digital-to-Analog Converter With Rail-to-Rail Output