I.S. SIL2 2/4-Wire Transmitter Trip Amplifier

FEATURES SIL 2 / SC 3 Input from Zone 0/Div. 1 Installation in Zone 2/Div. 2 ±12 V Voltage Input 0/4-20 mA Active-Passive Input, Source-Sink Output Input and Output short circuit proof Modbus RTU RS-485 for monitor & configuration Out-of-range fault detection Optional alarm acknowledgemen

文件：154.67 Kbytes 页数：2 Pages

GMI

Silicon NPN Power Transistors

DESCRIPTION • With TO-220C package • Complement to type 2SB596 • Good linearity of hFE APPLICATIONS • Power amplifier applications • Recommend for 20~25W high fidelity audio frequency amplifier output stage

文件：139.33 Kbytes 页数：4 Pages

SAVANTIC

I.S. SIL2 Load Cell/Strain Gauge Bridge Repeater

FEATURES SIL 2 / SC 3 Input from Zone 0 Installation in Zone 2 Strain Gauge Bridge Transparent Repeater Up to four 350 Ω load cells in parallel High Accuracy Three port isolation, Input/Output/Supply

文件：140.84 Kbytes 页数：2 Pages

GMI

I.S. SIL2 Load Cell/Strain Gauge Bridge Repeater

FEATURES SIL 2 / SC 3 Input from Zone 0 Installation in Zone 2 Strain Gauge Bridge Transparent Repeater Up to four 350 Ω load cells in parallel High Accuracy Three port isolation, Input/Output/Supply

文件：140.84 Kbytes 页数：2 Pages

GMI

I.S. SIL2 Load Cell/Strain Gauge Bridge Converter

FEATURES SIL 2 / SC 3 Input from Zone 0 Installation in Zone 2 Strain Gauge Bridge Isolated Converter Up to four 350 Ω load cells in parallel 0/4-20 mA sink/source output current Modbus RTU RS-485 for monitor & configuration Field Automatic Calibration Fully programmable operating paramet

文件：151.63 Kbytes 页数：2 Pages

GMI

I.S. SIL2 Load Cell/Strain Gauge Bridge Converter

FEATURES SIL 2 / SC 3 Input from Zone 0 Installation in Zone 2 Strain Gauge Bridge Isolated Converter Up to four 350 Ω load cells in parallel 0/4-20 mA sink/source output current Modbus RTU RS-485 for monitor & configuration Field Automatic Calibration Fully programmable operating paramet

文件：151.63 Kbytes 页数：2 Pages

GMI

I.S. SIL2 Temperature Converter & Trip Amplifier

FEATURES SIL 2 / SC 3 Input from Zone 0/Div. 1 Installation in Zone 2/Div. 2 mV, TC, 2/3/4wire res./RTD or potentiometer input Two independent Trip Amplifiers (SPDT relay contacts) Inversion/scaling/custom output Selectable CJC: internal PT1000, external RTD or fixed Fastest integration ti

文件：151.23 Kbytes 页数：2 Pages

GMI

I.S. SIL2 Temperature Converter & Trip Amplifier

FEATURES SIL 2 / SC 3 Input from Zone 0/Div. 1 Installation in Zone 2/Div. 2 mV, TC, 2/3/4wire res./RTD or potentiometer input Two independent Trip Amplifiers (SPDT relay contacts) Inversion/scaling/custom output Selectable CJC: internal PT1000, external RTD or fixed Fastest integration ti

文件：151.23 Kbytes 页数：2 Pages

GMI

SIL3 Relay Out Module for 10 A NE Loads

FEATURES SIL 3 / SC 3 for NE loads with NE driver Installation in Zone 2/Div. 2 Up to 10 A functional / 16 A inrush current Load disconnection on both supply lines available Compatible with DCS/PLC pulse testing Service contact available Input/Output isolation

文件：134.07 Kbytes 页数：2 Pages

GMI

SIL3 Relay Out Module for 10 A NE Loads

FEATURES SIL 3 / SC 3 for NE loads with NE driver Installation in Zone 2/Div. 2 Up to 10 A functional / 16 A inrush current Load disconnection on both supply lines available Compatible with DCS/PLC pulse testing Service contact available Input/Output isolation

文件：134.07 Kbytes 页数：2 Pages

GMI