BGT60LTR11AIP中文资料XENSIV ™ 60GHz 首款用于运动感应的完全自主雷达传感器数据手册Infineon规格书

描述 Description

The BGT60LTR11AIP MMIC is a fully integrated microwave motion sensor including Antennas in Package (AIP) as well as built-in motion and direction of motion detectors. A state machine enables operation of the device autonomously, i.e., without an external microcontroller or further signal processing. The MMIC has four quad-state input pins that give the performance parameters flexibility, even in this autonomous mode. The detection threshold or sensitivity has 16 different levels in order to fulfill a configurable detection range from 0.5 m up to 7 m with a typical human target Radar Cross Section (RCS). Hold time is also configurable in 16 levels in autonomous mode, which allows detection status to be held from 0.1 s up to 30 minutes. The device can achieve power consumption of less than 2mW with adjustable duty cycling.

The small, 3.3 × 6.7 × 0.56-mm³ MMIC has integrated antennas. This eliminates antenna design complexity at user end and allows the PCBs to be designed with standard FR4 materials.

These features make this small-sized radar solution a compelling smart and cost-effective replacement for conventional PIR sensors, even in low power or battery-powered products. In addition, the BGT60LTR11AIP addresses a huge variety of applications that can benefit from smart motion detection - whether to save energy, protect privacy or improve the user experience of smart devices.

For first evaluation of the BGT60LTR11AIP radar sensor, we offer the BGT60LTR11AIP demonstration kit, which allows testing the chip directly with the Radar GUI available via the Infineon Toolbox.

特性 Features

• 3.3 x 6.7 x 0.56 mm³ package size
• 1Tx 1Rx Antennas in Package (AIP) with 80 ° Half Power Beam Width (HPBW)
• Integrated motion detector
• Integrated direction of motion detector
• Multiple modes of operation including a completely autonomous mode
• Adjustable performance parameters such as detection sensitivity, hold time and frequency of operation
• Standard FR4 material can be used for PCB design

Benefits
• Autonomous mode:
• Up to 7 m detection range for humans
• Less than 2 mW power consumption possible
• Requires minimal external circuitry
• SPI mode:
• Up to 10 m detection range for human targets
• Requires microcontroller unit (e.g. Arm Cortex-M0)
• Advanced functionalities by SPI configuration or further signal processing

简介

BGT60LTR11AIP属于RF/IF射频/中频RFID的射频收发器IC。由制造生产的BGT60LTR11AIP射频收发器 IC射频收发器 IC 是将发射器和接收器集成于单个封装的半导体器件。收发器适用于各种射频系列产品或标准，例如 AISG、蓝牙、ISM、VHF、Wi-Fi、蜂窝、雷达、802.15.4 和 Z-Wave。此产品可根据调制类型和特定协议版本进一步分类。部分 IC 包含内置微控制器。