SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

MECHANICAL SPECS 1. Overall Module Size 78.0mm(W) x 70.0mm(H) x max 13.0mm(D) for LED backlight version 2. Dot Size 0.39mm(W) x 0.55mm(H) 3. Dot Pitch 0.44mm(W) x 0.60mm(H) 4. Duty 1/64 5. Controller IC S6B0108 or EQUI 6. LC Fluid Options STN 7. Polarizer Options Reflective,transflective,Tr

文件：260.279 Kbytes 页数：12 Pages

ZETTLER

ZETTLER Electronics

SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

INTRODUCTION This document specifies the outside dimensions, optical characteristics, electrical characteristics, interface, controller commands, etc. of the LCD module. FEATURES (1) Compact intregal COG display module (2) Low power consumption. (3) 128x164 dots FSTN LCD module. (4) Positive

文件：931.12 Kbytes 页数：13 Pages

AZDISPLAYS

STANDARD CHIP-ON-GLASS DISPLAYS

FEATURES In a COG display, a bare IC called “gold bump” or “flip chip” is connected to transparent traces on the LCD glass (no PCB needed). COMPACT: very space economical, modules can be as thin as 2 mm INEXPENSIVE: cost effective over COB & SMT modules, especially for graphic LCD’s, bec

文件：195.92 Kbytes 页数：1 Pages

AZDISPLAYS

SPECIFICATIONS FOR SPECIFICATIONS FOR

SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

文件：846.82 Kbytes 页数：13 Pages

AZDISPLAYS

STANDARD CHIP-ON-GLASS DISPLAYS

FEATURES In a COG display, a bare IC called “gold bump” or “flip chip” is connected to transparent traces on the LCD glass (no PCB needed). COMPACT: very space economical, modules can be as thin as 2 mm INEXPENSIVE: cost effective over COB & SMT modules, especially for graphic LCD’s, bec

文件：195.92 Kbytes 页数：1 Pages

AZDISPLAYS

SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

Features A. Drive Method: 1/65 Duty, 1/9 Bias B. The Module Operating Voltage: 3V; C. The LCD Operating Voltage : 9.0V; D. Viewing Direction: 12:00 E. Operating Temperature: 0 ~50°C F. Storage Temperature: -20 ~70°C G. Display type: STN or FSTN / Positive or Negative Mechanical Data: (1)

文件：1.49068 Mbytes 页数：13 Pages

AZDISPLAYS