50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD606 is a complete, monolithic logarithmic amplifier using a 9-stage “successive-detection” technique. It provides both logarithmic and limited outputs. The logarithmic output is from a three-pole post-demodulation low-pass filter and provides a loadable output voltage

文件：448.9 Kbytes 页数：12 Pages

AD

亚德诺

50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD606 is a complete, monolithic logarithmic amplifier using a 9-stage “successive-detection” technique. It provides both logarithmic and limited outputs. The logarithmic output is from a three-pole post-demodulation low-pass filter and provides a loadable output voltage

文件：448.9 Kbytes 页数：12 Pages

AD

亚德诺

50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD606 is a complete, monolithic logarithmic amplifier using a 9-stage “successive-detection” technique. It provides both logarithmic and limited outputs. The logarithmic output is from a three-pole post-demodulation low-pass filter and provides a loadable output voltage

文件：448.9 Kbytes 页数：12 Pages

AD

亚德诺

50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD606 is a complete, monolithic logarithmic amplifier using a 9-stage “successive-detection” technique. It provides both logarithmic and limited outputs. The logarithmic output is from a three-pole post-demodulation low-pass filter and provides a loadable output voltage

文件：448.9 Kbytes 页数：12 Pages

AD

亚德诺

50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD606 is a complete, monolithic logarithmic amplifier using a 9-stage “successive-detection” technique. It provides both logarithmic and limited outputs. The logarithmic output is from a three-pole post-demodulation low-pass filter and provides a loadable output voltage

文件：448.9 Kbytes 页数：12 Pages

AD

亚德诺

50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD606 is a complete, monolithic logarithmic amplifier using a 9-stage “successive-detection” technique. It provides both logarithmic and limited outputs. The logarithmic output is from a three-pole post-demodulation low-pass filter and provides a loadable output voltage

文件：448.9 Kbytes 页数：12 Pages

AD

亚德诺

Low Power Mixer/AGC/RSSI 3 V Receiver IF Subsystem

GENERAL DESCRIPTION The AD607 is a 3 V low power receiver IF subsystem for operation at input frequencies as high as 500 MHz and IFs from 400 kHz to 12 MHz. It consists of a mixer, IF amplifiers, I and Q demodulators, a phase-locked quadrature oscillator, and a biasing system with external power-

文件：510.77 Kbytes 页数：24 Pages

AD

亚德诺

Low Power Mixer/AGC/RSSI 3 V Receiver IF Subsystem

GENERAL DESCRIPTION The AD607 is a 3 V low power receiver IF subsystem for operation at input frequencies as high as 500 MHz and IFs from 400 kHz to 12 MHz. It consists of a mixer, IF amplifiers, I and Q demodulators, a phase-locked quadrature oscillator, and a biasing system with external power-

文件：510.77 Kbytes 页数：24 Pages

AD

亚德诺

Low Power Mixer/Limiter/RSSI 3 V Receiver IF Subsystem

GENERAL DESCRIPTION The AD608 provides a low power, low distortion, low noise mixer as well as a complete, monolithic logarithmic/limiting amplifier that uses a successive-detection technique. In addition, the AD608 provides both a high speed received signal strength indicator (RSSI) output with

文件：196.24 Kbytes 页数：12 Pages

AD

亚德诺

Low Power Mixer/Limiter/RSSI 3 V Receiver IF Subsystem

GENERAL DESCRIPTION The AD608 provides a low power, low distortion, low noise mixer as well as a complete, monolithic logarithmic/limiting amplifier that uses a successive-detection technique. In addition, the AD608 provides both a high speed received signal strength indicator (RSSI) output with

文件：196.24 Kbytes 页数：12 Pages

AD

亚德诺