16-Bit General Purpose Microcontrollers with 256-Kbyte Flash and 16-Kbyte RAM in Low Pin Count Packages

Analog Features • Up to 14-Channel, Software Selectable, 10/12-Bit Analog-to-Digital Converter: - 12-bit, 200K samples/second conversion rate (single Sample-and-Hold) - Sleep mode operation - Charge pump for operating at lower AVDD - Band gap reference input feature - Windowed threshold co

文件：3.46848 Mbytes 页数：416 Pages

Microchip

微芯科技

Low Power Mixer 3 V Receiver IF Subsystem

GENERAL DESCRIPTION The AD61009 is a 3 V low power receiver IF subsystem for operation at input frequencies as high as 500 MHz and IFs from 400 kHz to 12 MHz. It consists of a mixer, IF amplifiers, I and Q demodulators, a phase-locked quadrature oscillator, and a biasing system with external powe

文件：261.32 Kbytes 页数：24 Pages

AD

亚德诺

CDMA 3 V Transmitter IF Subsystem with Integrated Voltage Regulator

GENERAL DESCRIPTION The AD6122 is a low power IF transmitter subsystem, specifically designed for CDMA applications. It consists of an I and Q modulator, a divide-by-two quadrature generator, high dynamic range IF amplifiers with voltage-controlled gain and a power-down control input. An integral

文件：250.75 Kbytes 页数：20 Pages

AD

亚德诺

900 MHz RF Transceiver

GENERAL DESCRIPTION The AD6190 900 MHz RF Transceiver provides a complete RF/IF section for systems operating in the 902 MHz–928 MHz license-free ISM band. The high level of integration allows several dozen discrete components to be replaced. It is ideally suited for use in cordless telephone and

文件：150.06 Kbytes 页数：8 Pages

AD

亚德诺

900 MHz RF Transceiver

GENERAL DESCRIPTION The AD6190 900 MHz RF Transceiver provides a complete RF/IF section for systems operating in the 902 MHz–928 MHz license-free ISM band. The high level of integration allows several dozen discrete components to be replaced. It is ideally suited for use in cordless telephone and

文件：150.06 Kbytes 页数：8 Pages

AD

亚德诺

900 MHz RF Transceiver

GENERAL DESCRIPTION The AD6190 900 MHz RF Transceiver provides a complete RF/IF section for systems operating in the 902 MHz–928 MHz license-free ISM band. The high level of integration allows several dozen discrete components to be replaced. It is ideally suited for use in cordless telephone and

文件：150.06 Kbytes 页数：8 Pages

AD

亚德诺

Low Cost, Low Power Instrumentation Amplifier

PRODUCT DESCRIPTION The AD620 is a low cost, high accuracy instrumentation amplifier that requires only one external resistor to set gains of 1 to 10,000. Furthermore, the AD620 features 8-lead SOIC and DIP packaging that is smaller than discrete designs and offers lower power (only 1.3 mA max su

文件：571.34 Kbytes 页数：16 Pages

AD

亚德诺

Precision, Dual-Channel Instrumentation Amplifier

GENERAL DESCRIPTION The AD8222 is a dual-channel, high performance instrumentation amplifier that requires only one external resistor per amplifier to set gains of 1 to 10,000. The AD8222 is the first dual-instrumentation amplifier in the small 4 mm × 4mm LFCSP. It requires the same board area a

文件：595.66 Kbytes 页数：24 Pages

AD

亚德诺

10 MHz, 20 V/關s, G = 1, 10, 100, 1000 i CMOS짰 Programmable Gain Instrumentation Amplifier

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

文件：217.53 Kbytes 页数：10 Pages

AD

亚德诺

Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier

GENERAL DESCRIPTION The AD8426 is a dual-channel, low cost, wide supply range instrumentation amplifier that requires only one external resistor to set any gain from 1 to 1000. The AD8426 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the

文件：284.57 Kbytes 页数：20 Pages

AD

亚德诺