High Isolation, 2W & 3W Single & Dual Output DC/DC Converters

Key Features: ● 2W & 3W Output Power ● Compact DIP Case ● 3,000 VDC Isolation ● Tight Line/Load Regulation ● Single & Dual Outputs ● 17 Standard Models ● 800 kH MTBF ● Industry Standard Pin-Out

文件：80.96 Kbytes 页数：2 Pages

MPD

HALL-EFFECT SWITCH FOR 2-WIRE APPLICATIONS

This Hall-effect switch is a monolithic integrated circuit designed to operate continuously over extended temperatures to +85°C. The unipolar switching characteristic makes this device ideal for use with a simple bar or rod magnet. The A3161ELT and A3161EUA are identical except for package. FEATU

文件：169.76 Kbytes 页数：8 Pages

ALLEGRO

HALL-EFFECT SWITCH FOR 2-WIRE APPLICATIONS

This Hall-effect switch is a monolithic integrated circuit designed to operate continuously over extended temperatures to +85°C. The unipolar switching characteristic makes this device ideal for use with a simple bar or rod magnet. The A3161ELT and A3161EUA are identical except for package. FEATU

文件：169.76 Kbytes 页数：8 Pages

ALLEGRO

HALL-EFFECT SWITCH FOR 2-WIRE APPLICATIONS

FEATURES and BENEFITS ■ Internal Current Regulator for 2-Wire Operation ■ Output Slew Rate Controlled ■ 3.5 V to 25 V Operation … Needs Only An Unregulated Supply ■ Reverse Battery Protection ■ Excellent Temp. Stability ■ Activate with Small, Commercially Available Permanent Magnets ■ Small

文件：145.25 Kbytes 页数：8 Pages

ALLEGRO

HALL-EFFECT SWITCH FOR 2-WIRE APPLICATIONS

This Hall-effect switch is a monolithic integrated circuit designed to operate continuously over extended temperatures to +85°C. The unipolar switching characteristic makes this device ideal for use with a simple bar or rod magnet. The A3161ELT and A3161EUA are identical except for package. FEATU

文件：169.76 Kbytes 页数：8 Pages

ALLEGRO

HALL-EFFECT SWITCH FOR 2-WIRE APPLICATIONS

This Hall-effect switch is a monolithic integrated circuit designed to operate continuously over extended temperatures to +85°C. The unipolar switching characteristic makes this device ideal for use with a simple bar or rod magnet. The A3161ELT and A3161EUA are identical except for package. FEATU

文件：169.76 Kbytes 页数：8 Pages

ALLEGRO

HALL-EFFECT SWITCH FOR 2-WIRE APPLICATIONS

This Hall-effect switch is a monolithic integrated circuit designed to operate continuously over extended temperatures to +85°C. The unipolar switching characteristic makes this device ideal for use with a simple bar or rod magnet. The A3161ELT and A3161EUA are identical except for package. FEATU

文件：169.76 Kbytes 页数：8 Pages

ALLEGRO

HALL-EFFECT SWITCH FOR 2-WIRE APPLICATIONS

This Hall-effect switch is a monolithic integrated circuit designed to operate continuously over extended temperatures to +85°C. The unipolar switching characteristic makes this device ideal for use with a simple bar or rod magnet. The A3163ELT and A3163EUA are identical except for package. FEATU

文件：162.23 Kbytes 页数：10 Pages

ALLEGRO

HALL-EFFECT SWITCH FOR 2-WIRE APPLICATIONS

This Hall-effect switch is a monolithic integrated circuit designed to operate continuously over extended temperatures to +85°C. The unipolar switching characteristic makes this device ideal for use with a simple bar or rod magnet. The A3163ELT and A3163EUA are identical except for package. FEATU

文件：162.23 Kbytes 页数：10 Pages

ALLEGRO

BIPOLAR LINEAR REGULATOR 1A 40V ADJUSTABLE VOLTAGE

DESCRIPTION This monolithic integrated circuit is an adjustable 3-terminal positive voltage regulator designed to supply more than 1A of load current with an output voltage adjustable over a 1.2 to 37V. It employs internal current limiting, thermal shut-down and safe area compensation. The A317

文件：239.93 Kbytes 页数：7 Pages

AITSEMI

创瑞科技