HALL EFFECT GEAR-TOOTH SENSORS ZERO SPEED

HALL EFFECT GEAR-TOOTH SENSORS–ZERO SPEED The A3046EU/LU, A3056EU/LU, and A3058EU/LU Hall effect gear-tooth sensors are monolithic integrated circuits that switch in response to differential magnetic fields created by ferrous targets. These devices are ideal for use in gear-tooth-based speed,

文件：136.69 Kbytes 页数：8 Pages

ALLEGRO

HALL EFFECT GEAR-TOOTH SENSORS ZERO SPEED

HALL EFFECT GEAR-TOOTH SENSORS–ZERO SPEED The A3046EU/LU, A3056EU/LU, and A3058EU/LU Hall effect gear-tooth sensors are monolithic integrated circuits that switch in response to differential magnetic fields created by ferrous targets. These devices are ideal for use in gear-tooth-based speed,

文件：136.69 Kbytes 页数：8 Pages

ALLEGRO

HALL EFFECT GEAR-TOOTH SENSORS ZERO SPEED

HALL EFFECT GEAR-TOOTH SENSORS–ZERO SPEED The A3046EU/LU, A3056EU/LU, and A3058EU/LU Hall effect gear-tooth sensors are monolithic integrated circuits that switch in response to differential magnetic fields created by ferrous targets. These devices are ideal for use in gear-tooth-based speed,

文件：136.69 Kbytes 页数：8 Pages

ALLEGRO

MULTIPLEXED TWO-WIRE HALL-EFFECT SENSOR ICs

The A3054KU and A3054SU Hall-effect sensors are digital magnetic sensing ICs capable of communicating over a two-wire power/signal bus. Using a sequential addressing scheme, the device responds to a signal on the bus and returns the diagnostic status of the IC, as well as the status of each monito

文件：87.01 Kbytes 页数：12 Pages

ALLEGRO

MULTIPLEXED TWO-WIRE HALL-EFFECT SENSOR ICs

The A3054KU and A3054SU Hall-effect sensors are digital magnetic sensing ICs capable of communicating over a two-wire power/signal bus. Using a sequential addressing scheme, the device responds to a signal on the bus and returns the diagnostic status of the IC, as well as the status of each monito

文件：87.01 Kbytes 页数：12 Pages

ALLEGRO

MULTIPLEXED TWO-WIRE HALL-EFFECT SENSOR ICs

The A3054KU and A3054SU Hall-effect sensors are digital magnetic sensing ICs capable of communicating over a two-wire power/signal bus. Using a sequential addressing scheme, the device responds to a signal on the bus and returns the diagnostic status of the IC, as well as the status of each monito

文件：87.01 Kbytes 页数：12 Pages

ALLEGRO

HALL EFFECT GEAR-TOOTH SENSORS ZERO SPEED

HALL EFFECT GEAR-TOOTH SENSORS–ZERO SPEED The A3046EU/LU, A3056EU/LU, and A3058EU/LU Hall effect gear-tooth sensors are monolithic integrated circuits that switch in response to differential magnetic fields created by ferrous targets. These devices are ideal for use in gear-tooth-based speed,

文件：136.69 Kbytes 页数：8 Pages

ALLEGRO

HALL EFFECT GEAR-TOOTH SENSORS ZERO SPEED

HALL EFFECT GEAR-TOOTH SENSORS–ZERO SPEED The A3046EU/LU, A3056EU/LU, and A3058EU/LU Hall effect gear-tooth sensors are monolithic integrated circuits that switch in response to differential magnetic fields created by ferrous targets. These devices are ideal for use in gear-tooth-based speed,

文件：136.69 Kbytes 页数：8 Pages

ALLEGRO

HALL EFFECT GEAR-TOOTH SENSORS ZERO SPEED

HALL EFFECT GEAR-TOOTH SENSORS–ZERO SPEED The A3046EU/LU, A3056EU/LU, and A3058EU/LU Hall effect gear-tooth sensors are monolithic integrated circuits that switch in response to differential magnetic fields created by ferrous targets. These devices are ideal for use in gear-tooth-based speed,

文件：136.69 Kbytes 页数：8 Pages

ALLEGRO

HALL EFFECT GEAR-TOOTH SENSORS ZERO SPEED

HALL EFFECT GEAR-TOOTH SENSORS–ZERO SPEED The A3046EU/LU, A3056EU/LU, and A3058EU/LU Hall effect gear-tooth sensors are monolithic integrated circuits that switch in response to differential magnetic fields created by ferrous targets. These devices are ideal for use in gear-tooth-based speed,

文件：136.69 Kbytes 页数：8 Pages

ALLEGRO