Chopper-Stabilized, Two Wire Hall-Effect Latch

Description The A1244 is a two-wire Hall-effect latch. The devices are produced on the Allegro™advanced BiCMOS wafer fabrication process, which implements a patented high frequency, 4-phase, chopper-stabilization technique. This technique achieves magnetic stability over the full operating temp

文件：260.56 Kbytes 页数：12 Pages

ALLEGRO

Chopper-Stabilized, Two Wire Hall-Effect Latch

Description The A1244 is a two-wire Hall-effect latch. The devices are produced on the Allegro™advanced BiCMOS wafer fabrication process, which implements a patented high frequency, 4-phase, chopper-stabilization technique. This technique achieves magnetic stability over the full operating temp

文件：259.38 Kbytes 页数：12 Pages

ALLEGRO

丝印：A1244；Package：SC-65；Bipolar Small-Signal Transistors

MOS GT30F126 30F126 30A/330V IGBT TO-220F Toshiba 30F126 GT30F126 Reference site : http://monitor.net.ru/forum/30f126-info-494727.html Reference PDF (30F124, 30F125, 30F127, 30F128, 30F131) : http://pdf.datasheetbank.com/pdf/Toshiba/190505.pdf

文件：1.58274 Mbytes 页数：73 Pages

TOSHIBA

东芝

斩波稳定，双线霍尔效应锁存

 \n\n  Allegro MicroSystems recommends APS12400 for all new Automotive 2-wire Hall-Effect latch IC designs.\n\n The A1244 is a two-wire Hall-effect latch. The devices are produced on the Allegro advanced BiCMOS wafer fabrication process, which implements a patented high-frequency, 4-phase, \n• AEC-Q100 automotive qualified\n• High-speed, 4-phase chopper stabilization\n• Low switchpoint drift throughout temperature range\n• Low sensitivity to thermal and mechanical stresses\n\n• On-chip protection\n• Supply transient protection\n• Reverse-battery protection\n\n• On-board voltage regula;

Allegro

Chopper-Stabilized, Two Wire Hall-Effect Latch

Description The A1244 is a two-wire Hall-effect latch. The devices are produced on the Allegro™advanced BiCMOS wafer fabrication process, which implements a patented high frequency, 4-phase, chopper-stabilization technique. This technique achieves magnetic stability over the full operating temp

文件：259.38 Kbytes 页数：12 Pages

ALLEGRO

Chopper-Stabilized, Two Wire Hall-Effect Latch

Description The A1244 is a two-wire Hall-effect latch. The devices are produced on the Allegro™advanced BiCMOS wafer fabrication process, which implements a patented high frequency, 4-phase, chopper-stabilization technique. This technique achieves magnetic stability over the full operating temp

文件：259.38 Kbytes 页数：12 Pages

ALLEGRO

Chopper-Stabilized, Two Wire Hall-Effect Latch

Description The A1244 is a two-wire Hall-effect latch. The devices are produced on the Allegro™advanced BiCMOS wafer fabrication process, which implements a patented high frequency, 4-phase, chopper-stabilization technique. This technique achieves magnetic stability over the full operating temp

文件：259.38 Kbytes 页数：12 Pages

ALLEGRO

Chopper-Stabilized, Two Wire Hall-Effect Latch

Description The A1244 is a two-wire Hall-effect latch. The devices are produced on the Allegro™advanced BiCMOS wafer fabrication process, which implements a patented high frequency, 4-phase, chopper-stabilization technique. This technique achieves magnetic stability over the full operating temp

文件：259.38 Kbytes 页数：12 Pages

ALLEGRO

Chopper-Stabilized, Two-Wire Hall-Effect Latch

文件：725.06 Kbytes 页数：12 Pages

ALLEGRO

1-4 Pole Rotary Switches

文件：341.27 Kbytes 页数：5 Pages

ITT