Analog Signal Isolator 1-channel

The 1-channel signal isolator IM35-11EX-HI is designed to transmit the normalized current signal galvanically isolated 1:1 from the nonEx area to the Ex-area. In addition to the analog signal, also digital HART® communication signals can be transmitted bidirectionally. Typical applications ar

文件：224.24 Kbytes 页数：3 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Isolating transducer 2-channel

The 2-channel HART® isolating transducer IM33-22EX-HI is designed to operate intrinsically safe HART® 2-wire transducers (III) in the Ex area and to transmit the measured signals to the non-Ex area. In addition to the analog signals, also the digital HART® communication signals can be tran

文件：232.28 Kbytes 页数：3 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Isolating transducer 1-channel

The 1-channel HART® isolating transducer IM33-12EX-HI is designed to operate intrinsically safe HART® 2-wire transducers (III) in the Ex area and to transmit the measured signal to the non-Ex area. In addition to the analog signals, also the digital HART® communication signals can be trans

文件：227.24 Kbytes 页数：3 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Rotation speed monitor 1-channel

The rotation speed monitor IM21-14EXCDTRI monitors frequencies, rotation speeds and pulse trains of rotating motor, gear or turbine parts according to over or undershoot of adjusted limit values. The current value is indicated on a display on the front of the device. Intrinsically safe sensors

文件：352.13 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Isolating transducer 1-channel

The 1-channel isolating transducer IM33-14EX-CDRI is designed to operate intrinsically safe transmitters in the Ex area and to transmit the measured signals to the nonEx area. The device is equipped with an analog output of 0/4…20 mA; In addition, three relay outputs for limit values are availa

文件：322.73 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

ENGINEERS CUTTING TOOLS

文件：3.25271 Mbytes 页数：24 Pages

PRESTO

Common Mode Inductors/EMI Filters

文件：89.06 Kbytes 页数：1 Pages

Bourns

伯恩斯

AMPLIMITE D-Sub 插座组件：垂直，1.27mm

PCB D-Sub AMPLIMITE 插座组件，中心线间距为 1.27mm，采用垂直 PCB 安装方向。用于信号电路应用，工作温度范围为 -55-105℃。

TE

泰科

Connector - D-Shell Connector - PCB Mount

MACOM

共模滤波器

Bourns

伯恩斯