Low Voltage Octal D-Type Flip-Flop

General Description The LVX273 has eight edge-triggered D-type flip-flops with individual D inputs and Q outputs. Features ■ Input voltage translation from 5V to 3V ■ Ideal for low power/low noise 3.3V applications ■ Guaranteed simultaneous switching noise level and dynamic threshol

文件：80.9 Kbytes 页数：7 Pages

Fairchild

仙童半导体

OCTAL D-TYPE FLIP FLOP WITH CLEAR

Octal D-Type Flip-Flop with Clear The TC74LVX273F/ FW/ FT is a high-speed CMOS octal D-flip flop fabricated with silicon gate CMOS technology. Designed for use in 3-V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. Features ● High-speed: fma

文件：279.42 Kbytes 页数：8 Pages

TOSHIBA

东芝

LOW VOLTAGE CMOS OCTAL D-TYPE FLIP-FLOP WITH CLEAR (5V TOLERANT INPUTS)

DESCRIPTION The 74LVX273 is a low voltage CMOS OCTAL D-TYPE FLIP-FLOP WITH CLEAR fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power, battery operated and low noise 3.3V applications. ■ HIGH SPEED: fMAX = 150 MHz (TYP.) at V

文件：307.77 Kbytes 页数：12 Pages

STMICROELECTRONICS

意法半导体

Low Voltage Octal D-Type Flip-Flop

文件：198.55 Kbytes 页数：9 Pages

ONSEMI

安森美半导体

低电压八路 D 型触发器

LVX273包含带独立D输入和Q输出的八个边缘触发D型触发器。 共用缓冲时钟(CP)和主复位(MR#)输入负载并同时重置（清零）所有触发器。 寄存器完全为边沿触发。 每个D输入的状态在低电平至高电平时钟转换前的一个设置时间内传输到对应的触发器的Q输出。 所有输出将被强制为低电平，由MR#输入的一个低电压电平决定，与时钟或数据输入无关。 该设计对于仅要求原码输出的应用非常有用，时钟和主重置由所有存储元件共用。 输入容许电压达7V，允许5V系统到3V系统的连接。 •输入电压从5V转换为3V\n•非常适合低功率/低噪声3.3V应用\n•保证同步开关噪声电平和动态阈值性能;

ONSEMI

安森美半导体

OCTAL D-TYPE FLIP FLOP WITH CLEAR

Toshiba

东芝

LOW VOLTAGE OCTAL D-TYPE FLIP FLOP WITH CLEAR WITH 5V TOLERANT INPUTS

ST

意法半导体

Low Voltage Octal D-Type Flip-Flop

General Description The LVX273 has eight edge-triggered D-type flip-flops with individual D inputs and Q outputs. Features ■ Input voltage translation from 5V to 3V ■ Ideal for low power/low noise 3.3V applications ■ Guaranteed simultaneous switching noise level and dynamic threshol

文件：80.9 Kbytes 页数：7 Pages

Fairchild

仙童半导体

Low Voltage Octal D-Type Flip-Flop

General Description The LVX273 has eight edge-triggered D-type flip-flops with individual D inputs and Q outputs. Features ■ Input voltage translation from 5V to 3V ■ Ideal for low power/low noise 3.3V applications ■ Guaranteed simultaneous switching noise level and dynamic threshol

文件：80.9 Kbytes 页数：7 Pages

Fairchild

仙童半导体

LOW VOLTAGE CMOS OCTAL D-TYPE FLIP-FLOP WITH CLEAR (5V TOLERANT INPUTS)

DESCRIPTION The 74LVX273 is a low voltage CMOS OCTAL D-TYPE FLIP-FLOP WITH CLEAR fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power, battery operated and low noise 3.3V applications. ■ HIGH SPEED: fMAX = 150 MHz (TYP.) at V

文件：307.77 Kbytes 页数：12 Pages

STMICROELECTRONICS

意法半导体