Octal D-type flip-flop with 5-volt tolerant inputs/outputs; positive edge-trigger 3-State

DESCRIPTION The 74LVC574A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. FEATURES • 5-volt tolerant inputs/outputs, for interfacing with 5-volt logic • Supply voltage range of 2.7V to 3.6V • Complies with JEDEC

文件：99.8 Kbytes 页数：10 Pages

PHI

PHI

Octal D-type flip-flop with 5 V tolerant inputs/outputs; positive edge-trigger; 3-state

1. General description The 74LVC574A is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the

文件：271.63 Kbytes 页数：15 Pages

NEXPERIA

安世

Octal D-type flip-flop with 5-volt tolerant inputs/outputs; positive edge-trigger 3-State

DESCRIPTION The 74LVC574A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. FEATURES • 5-volt tolerant inputs/outputs, for interfacing with 5-volt logic • Supply voltage range of 2.7V to 3.6V • Complies with JEDEC

文件：99.8 Kbytes 页数：10 Pages

PHI

PHI

Low-Voltage CMOS Octal Buffer Flow Through Pinout

文件：101.31 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

Octal D-type flip-flop with 5 V tolerant inputs/outputs; positive-edge trigger (3-state)

The 74LVC574A is an octal D-type flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs for bus-oriented applications. A clock (CP) and an Output Enable (OE) input are common to all flip-flops.\n The eight flip-flops will store the state of their individual D-inputs tha • 5 V tolerant inputs and outputs for interfacing with 5 V logic\n• Supply voltage range from 1.2 to 3.6 V\n• CMOS low power consumption\n• Direct interface with TTL levels\n• High impedance when VCC = 0 V\n• 8-bit positive edge-triggered register\n• Independent register and 3-state buffer operation;

Nexperia

安世

Octal D-type flip-flop with 5 V tolerant inputs/outputs; positive-edge trigger (3-state)

The 74LVC574A is an octal D-type flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs for bus-oriented applications. A clock (CP) and an Output Enable (OE) input are common to all flip-flops.\n The eight flip-flops will store the state of their individual D-inputs tha • 5 V tolerant inputs and outputs for interfacing with 5 V logic\n• Supply voltage range from 1.2 to 3.6 V\n• CMOS low power consumption\n• Direct interface with TTL levels\n• High impedance when VCC = 0 V\n• 8-bit positive edge-triggered register\n• Independent register and 3-state buffer operation;

Nexperia

安世

Package：20-SOIC（0.295"，7.50mm 宽）；包装：管件 功能：标准 类别：集成电路（IC） 触发器 描述：IC FF D-TYPE SNGL 8BIT 20SO

Nexperia USA Inc.

Package：20-SSOP（0.209"，5.30mm 宽）；包装：管件 功能：标准 类别：集成电路（IC） 触发器 描述：IC FF D-TYPE SNGL 8BIT 20SSOP

Nexperia USA Inc.

Package：20-SSOP（0.209"，5.30mm 宽）；包装：管件 功能：标准 类别：集成电路（IC） 触发器 描述：IC FF D-TYPE SNGL 8BIT 20SSOP

Nexperia USA Inc.