丝印：VL；Package：SOT1115；Bilateral switch

1. General description The 74LVC1G66 is a single-pole, single-throw analog switch with two input/output terminals (nY and nZ) and a digital enable input (nE). When nE is LOW, the analog switch is turned off. Control inputs can be driven from either 3.3 V or 5 V devices. This feature allows the

文件：316.34 Kbytes 页数：21 Pages

NEXPERIA

安世

Bilateral switch

The 74LVC1G66 provides one single pole, single-throw analog switch function. It has two input/output terminals (Y and Z) and an active HIGH enable input pin (E). When E is LOW, the analog switch is turned off.\n Schmitt-trigger action at the enable input makes the circuit tolerant of slower input • Wide supply voltage range from 1.65 V to 5.5 V\n• Very low ON resistance:• 7.5 Ω (typical) at VCC = 2.7 V\n• 6.5 Ω (typical) at VCC = 3.3 V\n• 6 Ω (typical) at VCC = 5 V\n\n• Switch current capability of 32 mA\n• High noise immunity\n• CMOS low power consumption\n• TTL interface compatibility at 3;

Nexperia

安世

Bilateral switch

1. General description The 74LVC1G66 is a single-pole, single-throw analog switch with two input/output terminals (nY and nZ) and a digital enable input (nE). When nE is LOW, the analog switch is turned off. Control inputs can be driven from either 3.3 V or 5 V devices. This feature allows the

文件：316.34 Kbytes 页数：21 Pages

NEXPERIA

安世

Bilateral switch

DESCRIPTION The 74LVC1G66 is a high-speed Si-gate CMOS device. The 74LVC1G66 provides an analog switch. The switch has two input/output pins (Y and Z) and an active HIGH enable input pin (E). When pin E is LOW, the analog switch is turned off. FEATURES • Very low ON resistance: –

文件：151.13 Kbytes 页数：22 Pages

PHI

PHI