Octal buffer/line driver; 3-state; inverting

1. General description The 74HC540-Q100; 74HCT540-Q100 is an 8-bit inverting buffer/line driver with 3-state outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of

文件：236.78 Kbytes 页数：13 Pages

NEXPERIA

安世

Inverting Octal 3-STATE Buffer Octal 3-STATE Buffer

General Description The MM74HC540 and MM74HC541 3-STATE buffers utilize advanced silicon-gate CMOS technology. They possess high drive current outputs which enable high speed operation even when driving large bus capacitances. These circuits achieve speeds comparable to low power Schottky devic

文件：89.66 Kbytes 页数：6 Pages

Fairchild

仙童半导体

Octal 3-State Non-Inverting Buffer/Line Driver/Line Receiver

The MC74HC541A is identical in pinout to the LS541. The device inputs are compatible with Standard CMOS outputs. External pull−up resistors make them compatible with LSTTL outputs. The HC541A is an octal noninverting buffer/line driver/line receiver designed to be used with 3−state memory address

文件：127.95 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

Octal Buffers/Line Drivers (with 3-state outputs)

Description The HD74HC540 is an inverting buffer and the HD74HC541 is a non-inverting buffer. The 3-state control gate operates as a two-input NOR such that if either G1 or G2 are high, all eight outputs are in the high impedance state. Features • High Speed Operation: tpd = 11.5 ns typ (CL = 5

文件：51.47 Kbytes 页数：9 Pages

HitachiHitachi Semiconductor

日立日立公司

Octal buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT541 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Non-inverting outputs • Output capability: bus driver • ICC category: MSI

文件：43.58 Kbytes 页数：7 Pages

PHI

飞利浦

Octal buffer/line driver 3-state

General description The 74HC541; 74HCT541 is an octal non-inverting buffer/line driver with 3-state outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limi

文件：171.15 Kbytes 页数：19 Pages

恩XP

Octal buffer/line driver; 3-state

1. General description The 74HC541; 74HCT541 is an octal non-inverting buffer/line driver with 3-state outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current

文件：251.63 Kbytes 页数：14 Pages

NEXPERIA

安世

Octal buffer/line driver; 3-state

1. General description The 74HC541; 74HCT541 is an octal non-inverting buffer/line driver with 3-state outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current

文件：251.63 Kbytes 页数：14 Pages

NEXPERIA

安世

Octal buffer/line driver 3-state

General description The 74HC541; 74HCT541 is an octal non-inverting buffer/line driver with 3-state outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limi

文件：171.15 Kbytes 页数：19 Pages

恩XP

Octal buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT541 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Non-inverting outputs • Output capability: bus driver • ICC category: MSI

文件：43.58 Kbytes 页数：7 Pages

PHI

飞利浦