74HC4060BQ

14-stage binary ripple counter with oscillator

1.Generaldescription The74HC4060;74HCT4060isa14-stageripple-carrycounter/dividerandoscillatorwiththree oscillatorterminals(RS,RTCandCTC),tenbufferedparalleloutputs(Q3toQ9andQ11toQ13) andanoverridingasynchronousmasterreset(MR).Theoscillatorconfigurationallo

74HC4060BQ

14-stage binary ripple counter with oscillator; • All active components on chip\n• RC or crystal oscillator configuration\n• Complies with JEDEC standard no. 7 A\n• Input levels:• For 74HC4060: CMOS level\n• For 74HCT4060: TTL level\n\n• ESD protection:• HBM JESD22-A114F exceeds 2000 V\n• MM JESD22-A115-A exceeds 200 V\n\n• Multiple package options\n• Specified from -40 °C to +85 °C and from -40 °C to +125 °C\n;

The 74HC4060; 74HCT4060 is a 14-stage ripple-carry counter/divider and oscillator with three oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13) and an overriding asynchronous master reset (MR). The oscillator configuration allows design of either RC or crystal oscillator circuits. The oscillator may be replaced by an external clock signal at input RS. In this case, keep the oscillator pins (RTC and CTC) floating. The counter advances on the HIGH-to-LOW transition of RS. A HIGH level on MR clears all counter stages and forces all outputs LOW, independent of the other input conditions. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.\n

74HC4060BQ-Q100

14-stage binary ripple counter with oscillator; • Automotive product qualification in accordance with AEC-Q100 (Grade 1)• Specified from -40 °C to +85 °C and from -40 °C to +125 °C\n\n• All active components on chip\n• RC or crystal oscillator configuration\n• ESD protection:• MIL-STD-883, method 3015 exceeds 2000 V\n• HBM JESD22-A114F exceeds 2000 V\n• MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)\n\n• Multiple package options\n;

The 74HC4060-Q100; 74HCT4060-Q100 are high-speed Si-gate CMOS devices that comply with JEDEC standard no. 7A. They are pin compatible with Low-power Schottky TTL (LSTTL).\n The 74HC4060-Q100; 74HCT4060-Q100 are 14-stage ripple-carry counter/dividers and oscillators with three oscillator terminals (RS, RTC and CTC), ten buffered outputs (Q3 to Q9 and Q11 to Q13) and an overriding asynchronous master reset (MR). The oscillator configuration allows design of either RC or crystal oscillator circuits. The oscillator may be replaced by an external clock signal at input RS. In this case keep the other oscillator pins (RTC and CTC) floating. The counter advances on the negative-going transition of RS. A HIGH level on MR resets the counter (Q3 to Q9 and Q11 to Q13 = LOW), independent of other input conditions. In the HCT version, the MR input is TTL compatible, but the RS input has CMOS input switching levels and can be driven by a TTL output by using a pull-up resistor to VCC.\n This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.\n

74HC4060BQ-Q100

14-stage binary ripple counter with oscillator

1.Generaldescription The74HC4060-Q100;74HCT4060-Q100isa14-stageripple-carrycounter/dividerandoscillator withthreeoscillatorterminals(RS,RTCandCTC),tenbufferedparalleloutputs(Q3toQ9andQ11 toQ13)andanoverridingasynchronousmasterreset(MR).Theoscillatorconfigur

74HC4060BQ,115

Package：16-VFQFN 裸露焊盘；包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 类别：集成电路（IC） 计数器，除法器 描述：IC BINARY COUNTER 14STG 16DHVQFN

Nexperia USA Inc.

74HC4060BQ-Q100,11

Package：16-VFQFN 裸露焊盘；包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 类别：集成电路（IC） 计数器，除法器 描述：IC BINARY RIPPLE COUNT 16DHVQFN

Nexperia USA Inc.