74HC4052PW

Dual 4-channel analog multiplexer/demultiplexer

1.Generaldescription The74HC4052;74HCT4052isadualsingle-polequad-throwanalogswitch(2×SP4T)suitable foruseinanalogordigital4:1multiplexer/demultiplexerapplications.Eachswitchfeaturesfour independentinputs/outputs(nY0,nY1,nY2andnY3)andacommoninput/output(nZ).

74HC4052PW

Dual 4-channel analog multiplexer/demultiplexer; • Wide analog input voltage range from -5 V to +5 V\n• Low ON resistance:• 80 Ω (typical) at VCC - VEE = 4.5 V\n• 70 Ω (typical) at VCC - VEE = 6.0 V\n• 60 Ω (typical) at VCC - VEE = 9.0 V\n\n• Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals\n• Typical ‘break before make’ built-in\n• Complies with JEDEC standard no. 7A\n• Input levels:• For 74HC4052: CMOS level\n• For 74HCT4052: TTL level\n\n• ESD protection:• HBM JESD22-A114F exceeds 2000 V\n• MM JESD22-A115-A exceeds 200 V\n• CDM JESD22-C101E exceeds 1000 V\n\n• Specified from -40 °C to +85 °C and -40 °C to +125 °C\n;

The 74HC4052; 74HCT4052 is a dual single-pole quad-throw analog switch (2x SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications. Each switch features four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). A digital enable input (E) and two digital select inputs (S0 and S1) are common to both switches. When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.\n

74HC4052PW

Dual 4-channel analog multiplexer, demultiplexer

74HC4052PW-Q100

Dual 4-channel analog multiplexer/demultiplexer; • Automotive product qualification in accordance with AEC-Q100 (Grade 1)• Specified from -40 °C to +85 °C and from -40 °C to +125 °C\n\n• Wide analog input voltage range from -5 V to +5 V\n• Low ON resistance:• 80 Ω (typical) at VCC - VEE = 4.5 V\n• 70 Ω (typical) at VCC - VEE = 6.0 V\n• 60 Ω (typical) at VCC - VEE = 9.0 V\n\n• Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals\n• Typical ‘break before make’ built-in\n• ESD protection:• MIL-STD-883, method 3015 exceeds 2000 V\n• HBM JESD22-A114F exceeds 2 000 V\n• MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)\n• CDM AEC-Q100-011 revision B exceeds 1000 V\n\n• Multiple package options\n• DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints\n;

The 74HC4052-Q100; 74HCT4052-Q100 is a dual single-pole quad-throw analog switch (2xSP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications. Each switch features four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). Adigital enable input (E) and two digital select inputs (S0 and S1) are common to both switches. When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.\n This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.\n

74HC4052PW-Q100

Dual 4-channel analog multiplexer/demultiplexer

1.Generaldescription The74HC4052-Q100;74HCT4052-Q100isadualsingle-polequad-throwanalogswitch(2xSP4T) suitableforuseinanalogordigital4:1multiplexer/demultiplexerapplications.Eachswitchfeatures fourindependentinputs/outputs(nY0,nY1,nY2andnY3)andacommoninput/out

74HC4052PW-Q100

Dual 4-channel analog multiplexer/demultiplexer