Octal buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT244 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Output capability: bus driver • ICC category: MSI

文件：39.17 Kbytes 页数：7 Pages

PHI

飞利浦

Octal buffer/line driver; 3-state

General description The 74HC244; 74HCT244 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to a

文件：145.15 Kbytes 页数：18 Pages

恩XP

Octal buffer/line driver; 3-state

1. General description The 74HC244; 74HCT244 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs

文件：262.42 Kbytes 页数：15 Pages

NEXPERIA

安世

Octal buffer/line driver; 3-state

General description The 74HC244; 74HCT244 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). The 74HC244; 74HCT244 has octal non-inverting buffer/line drivers with 3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE an

文件：164.24 Kbytes 页数：22 Pages

SYC

Octal buffer/line driver; 3-state

文件：145.15 Kbytes 页数：18 Pages

恩XP

Octal buffer/line driver; 3-state

文件：127.32 Kbytes 页数：22 Pages

PHI

飞利浦

Octal buffer/line driver; 3-state

文件：145.15 Kbytes 页数：18 Pages

PHI

飞利浦

Octal buffer/line driver; 3-state Rev. 4 ??24 September 2012

文件：145.15 Kbytes 页数：18 Pages

PHI

飞利浦

Octal buffer/line driver; 3-state

文件：249.11 Kbytes 页数：15 Pages

NEXPERIA

安世

Octal buffer/line driver; 3-state

The 74HC244; 74HCT244 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a high-impedanc • Input levels:• For 74HC244: CMOS level\n• For 74HCT244: TTL level\n\n• Octal bus interface\n• Non-inverting 3-state outputs\n• Complies with JEDEC standard no. 7 A\n• ESD protection:• HBM JESD22-A114F exceeds 2000 V\n• MM JESD22-A115-A exceeds 200 V\n\n• Multiple package options\n• Specified from ;

Nexperia

安世