Bilateral switch

DESCRIPTION The 74HC1G/HCT1G66 is a high-speed Si-gate CMOSdevice. The 74HC1G/HCT1G66 provides an analog switch. The switch has two input/output pins (Y and Z) and an active HIGH enable input pin (E). When pin E is LOW, the analog switch is turned off. The non standard output currents are equal

文件：102.88 Kbytes 页数：20 Pages

PHI

飞利浦

Single-pole single-throw analog switch

General description 74HC1G66 and 74HCT1G66 are high-speed Si-gate CMOS devices. They are single-pole single-throw analog switches. The switch has two input/output pins (Yand Z) and an active HIGH enable input pin (E). When pin E is LOW, the analog switch is turned off. The non-standard output cu

文件：115.51 Kbytes 页数：18 Pages

恩XP

丝印：HL；Package：SOT353-1；Single-pole single-throw analog switch

1. General description The 74HC1G66; 74HCT1G66 is a single-pole, single-throw analog switch with two input/output terminals (nY and nZ) and a digital enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use of current limiting resisto

文件：269.25 Kbytes 页数：17 Pages

NEXPERIA

安世

丝印：HL；Package：TSSOP5；Single-pole single-throw analog switch

文件：730.08 Kbytes 页数：19 Pages

NEXPERIA

安世

Single-pole single-throw analog switch

74HC1G66 and 74HCT1G66 are high-speed Si-gate CMOS devices. They are single-pole single-throw analog switches. The switch has two input/output pins (Y and Z) and an active HIGH enable input pin (E). When pin E is LOW, the analog switch is turned off.\n The non-standard output currents are equal t • Wide supply voltage range from 2.0 V to 10.0 V for the 74HC1G66\n• Very low ON resistance:• 45 Ω (typ.) at VCC = 4.5 V\n• 30 Ω (typ.) at VCC = 6.0 V\n• 25 Ω (typ.) at VCC = 9.0 V\n\n• High noise immunity\n• Low power dissipation\n• Multiple package options\n• ESD protection:• HBM JESD22-A114E exce;

Nexperia

安世

Single-pole single-throw analog switch

The 74HC1G66-Q100; 74HCT1G66-Q100 is a single-pole, single-throw analog switch with two input/output terminals (nY and nZ) and a digital enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes that enable the use of current limiting resistors to interface inpu • Automotive product qualification in accordance with AEC-Q100 (Grade 1)• Specified from -40 °C to +85 °C and from -40 °C to +125 °C\n\n• Wide supply voltage range from 2.0 V to 10.0 V for the 74HC1G66-Q100\n• Very low ON resistance:• 45 Ω (typ.) at VCC = 4.5 V\n• 30 Ω (typ.) at VCC = 6.0 V\n• 25 Ω ;

Nexperia

安世