74ALVC16244DL数据手册集成电路（IC）的缓冲器驱动器接收器收发器规格书PDF

描述 Description

The 74ALVC16244; 74ALVCH16244 is a 16-bit non-inverting buffer/line driver with 3-state outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The 3-state outputs are controlled by the output enable inputs 1OE, 2OE, 3OE and 4OE. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state.
The 74ALVCH16244 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down resistors.
The 74ALVC16244 has 5 V tolerant inputs.

特性 Features

• Wide supply voltage range from 1.2 to 3.6 V
• CMOS low power consumption
• MultiByte flow-through standard pin-out architecture
• Low inductance multiple VCC and GND pins for minimum noise and ground bounce
• Direct interface with TTL levels
• Bus hold on data inputs (74ALVCH16244 only)
• Output drive capability 50 Ω transmission lines at 85 Cel
• Current drive +-24 mA at 3.0 V
• Complies with JEDEC standard no. 8-1 A
• ESD protection:
• HBM EIA/JESD22-A114-A exceeds 2000 V
• MM EIA/JESD22-A115-A exceeds 200 V.