excom I/O System Relay Module, 6-channel

The relay module DO60R-N is used for the connection of non-intrinsically safe actuators such as valves or indicator lights. The outputs are designed as zero-potential relay contacts. ■ 2 x changeover contacts (channel 1 and 2) ■ 4 x NO contacts (channel 3 to 6) The channels 3/4 and 5/6 are s

文件：359.37 Kbytes 页数：2 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

excom I/O System Output Module, Digital, 4-channel

The output module DO401Ex is used for the connection of intrinsically safe actuators such as valves or indicator lights. The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with excom®. Explosion protection category is Ex ia IIC. The outputs are galvani

文件：380.32 Kbytes 页数：2 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

excom I/O System Input Module, Analog, 4-channel

The input module AI401Ex is used for the connection of 2-wire transducers (active input = source mode / transducer passive) or 4- wire transducers (passive input = sink mode / transducer active). The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with

文件：376.69 Kbytes 页数：2 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

excom I/O System Output Module, Analog, 4-channel

The output module AO401Ex is used for the connection of intrinsically safe analog actuators such as control valves or process indicators. The module features protection class Ex ib IIC and can be mounted in zone 1 in combination with the excom system. The explosion protection category of the o

文件：362.65 Kbytes 页数：2 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

excom I/O System Input Module, Temperature, 4-channel

The input module TI40Ex is used for the connection of 2, 3 and 4-wire temperature probes of the types Pt100, Pt200, Pt500, Pt1000, Ni100 and CU100, as well as for the connection of thermocouples of the types B, E, D, J, K, L, N, R, S, T and U. The module can also be used for the measurement of

文件：385.57 Kbytes 页数：3 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

excom I/O System Input Module, Temperature, 4-channel

The input module TI40-N is used for the connection of 2, 3 and 4-wire temperature probes of the types Pt100, PT200, Pt500, Pt1000, Ni100 and CU100, as well as for the connection of thermocouples of the types B, E, D, J, K, L, N, R, S, T and U. The module can also be used for the measurement of

文件：375.59 Kbytes 页数：3 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

excom I/O System 4-Channel Temperature Input Module

The input module TI401EX is used for the connection of 2, 3 and 4-wire temperature probes of the types Pt100, Pt200, Pt500, Pt1000, Ni100 and Cu100, as well as for the connection of thermocouples of the types B, E, D, J, K, L, N, R, S, T and U. The module can also be used for the measurement

文件：393.83 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

excom I/O System 4-Channel Temperature Input Module

The input module TI401-N is used for the connection of 2, 3 and 4-wire temperature probes of the types Pt100, Pt200, Pt500, Pt1000, Ni100 and Cu100, as well as for the connection of thermocouples of the types B, E, D, J, K, L, N, R, S, T and U. The module can also be used for the measurement of

文件：395 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

excom I/O System I/O Module, Digital, 8-channel

The I/O module DM80-N is used for the connection of NAMUR sensors (DIN EN 60 60947-5-6) and actuators. When wire-break or short-circuit monitoring are activated, mechanical contacts can only be connected with a corresponding resistor circuitry (WM1, Ident no. 0912101). When connecting the fie

文件：396.05 Kbytes 页数：3 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

excom I/O System Frequency Meter, 2-channel

The input module DF20-N is equipped with 8 channels acc. to NAMUR, which are grouped together in two blocks. There is one frequency input per block and three control inputs/outputs. The module can be used as a counter or frequency input module: It is thus suited for pulse counting of binary in

文件：381.5 Kbytes 页数：3 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司