CHOPPER-STABILIZED, PRECISION HALL-EFFECT LATCHES

The A3280--, A3281--, and A3283-- Hall-effect latches are ex tremely temperature-stable and stress-resistant sensors especially suited for operation over extended temperature ranges to +150°C. Superior high-temperature per for mance is made possible through dynamic offset cancellation, which reduc

文件：266.13 Kbytes 页数：11 Pages

ALLEGRO

SENSITIVE HALL-EFFECT SWITCHES FOR HIGH-TEMPERATURE OPERATION

RATIOMETRIC, LINEAR HALL-EFFECT SENSORS FOR HIGH-TEMPERATURE OPERATION The A3515– and A3516– are sensitive, temperature-stable linear Hall effect sensors with greatly improved offset characteristics. Ratiometric, linear Hall-effect sensors provide a voltage output that is proportional to the appl

文件：154.45 Kbytes 页数：8 Pages

ALLEGRO

PIDG TERMINALS & SPLICES

FEATURES AND BENEFITS • Made of high conductivity copper; tin-plated for optimal corrosion protection • Copper sleeve for vibration resistance and improved wire insulation support • Body has inner serrations for maximum electrical contact and tensile strength • Insulation sleeves are color-cod

文件：6.05555 Mbytes 页数：12 Pages

TEC

泰科电子

Electromotive 2-way globe proportional valve

The direct-acting Type 3285 motor valve is suitable for dosing liquids and gases in closed or open control loops. The valve is driven by a stepper motor. The integrated electronics assembly simplifies the process integration; additional actuation modules are not necessary. The engine does not n

文件：978.53 Kbytes 页数：15 Pages

BURKERT

宝帝流体控制系统

Flowmeter for gases

This flowmeter series is made for the measurement of especially large flow rates and use the calorimetric measuring principle. A heated sensor element is cooled down by the gas flow. This cooling effect which depends on the flow velocity and the gas characteristics serves as a flow indication,

文件：962.12 Kbytes 页数：10 Pages

BURKERT

宝帝流体控制系统

PLASTI-GRIP Terminals & Splices

Key Features and Benefits • Vinyl insulation sleeve provides good dielectric strength and supports the wire insulation so that no bare wire is exposed • Most product is UL and CSA approved • Most product rated to 105 degrees C, with an operating voltage of 600 V • Insulation is 94V-0 rated •

文件：2.49255 Mbytes 页数：6 Pages

TEC

泰科电子

PLASTI-GRIP Terminals & Splices

Key Features and Benefits • Vinyl insulation sleeve provides good dielectric strength and supports the wire insulation so that no bare wire is exposed • Most product is UL and CSA approved • Most product rated to 105 degrees C, with an operating voltage of 600 V • Insulation is 94V-0 rated •

文件：2.49255 Mbytes 页数：6 Pages

TEC

泰科电子

PIDG TERMINALS & SPLICES

FEATURES AND BENEFITS • Made of high conductivity copper; tin-plated for optimal corrosion protection • Copper sleeve for vibration resistance and improved wire insulation support • Body has inner serrations for maximum electrical contact and tensile strength • Insulation sleeves are color-cod

文件：6.05555 Mbytes 页数：12 Pages

TEC

泰科电子

PIDG TERMINALS & SPLICES

FEATURES AND BENEFITS • Made of high conductivity copper; tin-plated for optimal corrosion protection • Copper sleeve for vibration resistance and improved wire insulation support • Body has inner serrations for maximum electrical contact and tensile strength • Insulation sleeves are color-cod

文件：6.05555 Mbytes 页数：12 Pages

TEC

泰科电子

PIDG TERMINALS & SPLICES

FEATURES AND BENEFITS • Made of high conductivity copper; tin-plated for optimal corrosion protection • Copper sleeve for vibration resistance and improved wire insulation support • Body has inner serrations for maximum electrical contact and tensile strength • Insulation sleeves are color-cod

文件：6.05555 Mbytes 页数：12 Pages

TEC

泰科电子