110 Channel CATV Optical Receiver

文件：301.87 Kbytes 页数：2 Pages

EMCORE

Emcore Corporation

2808 110 Channel CATV Optical Receiver

文件：184.56 Kbytes 页数：2 Pages

EMCORE

Emcore Corporation

丝印：28089；Package：SOIC；PRIMARY-SIDE PUSH-PULL OSCILLATOR WITH DEAD-TIME CONTROL

FEATURES Push-Pull Oscillator With Programmable Deadtime High-Current Totem-Pole Dual Output Stage Drives Push-Pull Configuration with 1-A Sink and 0.5-A Source Capability Can be Used in Push-Pull, Half-Bridge, or Full-Bridge Topologies Oscillator Synchronization Output Low Start-Up Curre

文件：601.8 Kbytes 页数：25 Pages

TI

德州仪器

丝印：28089；Package：SOIC；PRIMARY-SIDE PUSH-PULL OSCILLATOR WITH DEAD-TIME CONTROL

FEATURES Push-Pull Oscillator With Programmable Deadtime High-Current Totem-Pole Dual Output Stage Drives Push-Pull Configuration with 1-A Sink and 0.5-A Source Capability Can be Used in Push-Pull, Half-Bridge, or Full-Bridge Topologies Oscillator Synchronization Output Low Start-Up Curre

文件：601.8 Kbytes 页数：25 Pages

TI

德州仪器

丝印：28089；Package：SOIC；PRIMARY-SIDE PUSH-PULL OSCILLATOR WITH DEAD-TIME CONTROL

FEATURES Push-Pull Oscillator With Programmable Deadtime High-Current Totem-Pole Dual Output Stage Drives Push-Pull Configuration with 1-A Sink and 0.5-A Source Capability Can be Used in Push-Pull, Half-Bridge, or Full-Bridge Topologies Oscillator Synchronization Output Low Start-Up Curre

文件：601.8 Kbytes 页数：25 Pages

TI

德州仪器

丝印：28089；Package：SOIC；PRIMARY-SIDE PUSH-PULL OSCILLATOR WITH DEAD-TIME CONTROL

FEATURES Push-Pull Oscillator With Programmable Deadtime High-Current Totem-Pole Dual Output Stage Drives Push-Pull Configuration with 1-A Sink and 0.5-A Source Capability Can be Used in Push-Pull, Half-Bridge, or Full-Bridge Topologies Oscillator Synchronization Output Low Start-Up Curre

文件：601.8 Kbytes 页数：25 Pages

TI

德州仪器

丝印：2808A-1；Package：SOIC；UCCx808A Low-Power Current-Mode Push-Pull PWM

1 Features 1• Dual-Output Drive Stages in Push-Pull Configuration • Current-Sense Discharge Transistor to Improve Dynamic Response • 130-μA Typical Starting Current • 1-mA Typical Run Current • Operation to 1 MHz • Internal Soft Start • On-Chip Error Amplifier With 2-MHz Gain Bandwidth P

文件：427.35 Kbytes 页数：21 Pages

TI

德州仪器

丝印：2808A-2；Package：SOIC；UCCx808A Low-Power Current-Mode Push-Pull PWM

1 Features 1• Dual-Output Drive Stages in Push-Pull Configuration • Current-Sense Discharge Transistor to Improve Dynamic Response • 130-μA Typical Starting Current • 1-mA Typical Run Current • Operation to 1 MHz • Internal Soft Start • On-Chip Error Amplifier With 2-MHz Gain Bandwidth P

文件：427.35 Kbytes 页数：21 Pages

TI

德州仪器

丝印：2808A-1；Package：SOIC；UCCx808A Low-Power Current-Mode Push-Pull PWM

1 Features 1• Dual-Output Drive Stages in Push-Pull Configuration • Current-Sense Discharge Transistor to Improve Dynamic Response • 130-μA Typical Starting Current • 1-mA Typical Run Current • Operation to 1 MHz • Internal Soft Start • On-Chip Error Amplifier With 2-MHz Gain Bandwidth P

文件：427.35 Kbytes 页数：21 Pages

TI

德州仪器

丝印：2808A-1；Package：SOIC；UCCx808A Low-Power Current-Mode Push-Pull PWM

1 Features 1• Dual-Output Drive Stages in Push-Pull Configuration • Current-Sense Discharge Transistor to Improve Dynamic Response • 130-μA Typical Starting Current • 1-mA Typical Run Current • Operation to 1 MHz • Internal Soft Start • On-Chip Error Amplifier With 2-MHz Gain Bandwidth P

文件：427.35 Kbytes 页数：21 Pages

TI

德州仪器