Glass passivated chip.

Zener Voltage: 3.3 to 330 Volts DC Power: 1 Watts RoHS Device Features - Glass passivated chip. - Low leakage. - Built-in strain relief. - Low inductance. - High peak reverse power dissipation. - For use in stabilizing and clipping with high power rating. Mechanical data - Case: Mol

文件：125.68 Kbytes 页数：6 Pages

COMCHIP

典琦

SILICON ZENER DIODE

VOLTAGE 3.3 to 100 Volts POWER 1.0 Watts FEATURES • Low profile package • Built-in strain relief • Low inductance • High temperature soldering : 260°C /10 seconds at terminals • Glass package has Underwriters Laboratory Flammability Classification • Pb free product are available : 99 Sn

文件：399.35 Kbytes 页数：5 Pages

PANJIT

強茂

1 WATT ZENER DIODE

FEATURES • LOW COST • SMALL SIZE • ROHS

文件：127.7 Kbytes 页数：2 Pages

FRONTIER

1.0 Watt Zener Diode 6.8 to 100 Volts

Features ● Wide Zener Voltage Range Available ● Halogen free available upon request by adding suffix -HF ● Epoxy meets UL 94 V-0 flammability rating ● Moisture Sensitivity Level 1 ● Glass Passivated Zener Didoe ● Lead Free Finish/Rohs Compliant (Note2) (PSuffix designates Compliant. See orde

文件：542.87 Kbytes 页数：4 Pages

MCC

1W GLASS PASSIVATED CHIP & PLASTIC CASE ZENER DIODE

FEATURES * Glass passivated chip * Low leakage * Built-in strain relief * Low inductance * High peak reverse power dissipation * For use in stabilizing and clipping circuits with high power rating

文件：490.16 Kbytes 页数：3 Pages

CHENG-YI

辰頤电子

Silicon 1 Watt Zener Diodes

DESCRIPTION The popular 1N4728AP thru 1N4764AP series of 1.0 watt Zeners provides voltage regulation in a selection from 3.3 to 100 volts in 5 tolerances with other tighter tolerances also available as identified by different suffix letters in the part number. These plastic encapsulated Zeners ar

文件：175.58 Kbytes 页数：3 Pages

MICROSEMI

美高森美

丝印：4751A；Package：DO-41；Zener Diodes

DESCRIPTION: AXIAL LEAD / DO−41

文件：111.88 Kbytes 页数：7 Pages

ONSEMI

安森美半导体

丝印：4751A；Package：DO-41；Zener Diodes

DESCRIPTION: AXIAL LEAD / DO−41

文件：111.88 Kbytes 页数：7 Pages

ONSEMI

安森美半导体

SURFACE MOUNT 1.0W GLASS ZENDER DIODE

DESCRIPTION This surface mountable 1 watt Zener diode series is electrically equivalent to the 1N4728A thru 1N4764A registration in the DO-41 equivalent package except that it meets the JEDEC surface mount outline DO-213AB. It is an ideal selection for applications of high density and low parasit

文件：365.49 Kbytes 页数：3 Pages

MICROSEMI

美高森美

METALLURGICALLY BONDED GLASS SURFACE MOUNT 1.0 W ZENERS

FEATURES • Electrically similar to the JEDEC registered 1N4728 thru 1N4764 zener series • Zener voltages available 3.3V to 100V • Standard voltage tolerances are +/- 5 with “A” suffix and 10 with no suffix identification • Tight tolerances available in plus or minus 2 or 1 with C or D suff

文件：132.37 Kbytes 页数：5 Pages

MICROSEMI

美高森美