PTU 4-TWIN-TG-P - Disconnect terminal block

Disconnect terminal block, with test socket screws to accommodate 4 mm test plugs, nom. voltage: 500 V, nominal current: 20 A, connection method: Push-in connection, Rated cross section: 4 mm2, cross section: 0.2 mm2 - 6 mm2, connection method: Screw connection, Rated cross section: 4 mm2, cros

文件：211.98 Kbytes 页数：7 Pages

PHOENIXPHOENIX CONTACT

菲尼克斯德国菲尼克斯电气集团

PTU 4-TWIN-MT-P - Knife-disconnect terminal block

Knife-disconnect terminal block, with test socket screws to accommodate 4 mm test plugs, nom. voltage: 500 V, nominal current: 20 A, connection method: Push-in connection, Rated cross section: 4 mm2, cross section: 0.2 mm2 - 6 mm2, connection method: Screw connection, Rated cross section: 4 mm2

文件：213.37 Kbytes 页数：7 Pages

PHOENIXPHOENIX CONTACT

菲尼克斯德国菲尼克斯电气集团

PTU 4-TWIN-MT - Knife-disconnect terminal b

Knife-disconnect terminal block, nom. voltage: 500 V, nominal current: 20 A, connection method: Push-in connection, Rated cross section: 4 mm2, cross section: 0.2 mm2 - 6 mm2, connection method: Screw connection, Rated cross section: 4 mm2, cross section: 0.2 mm2 - 6 mm2, mounting: NS 35/7,5, N

文件：213.34 Kbytes 页数：7 Pages

PHOENIXPHOENIX CONTACT

菲尼克斯德国菲尼克斯电气集团

7/8 Power Field Attachable Connector: Male, straight, 3-pin(2PE), black housing, 230 V AC/DC, 12 A

Product Description 7/8 Power Field Attachable Connector: Male, straight, 3-pin(2+PE), black housing, 230 V AC/DC, 12 A

文件：528.12 Kbytes 页数：2 Pages

BELDEN

百通

Power supply unit - TRIO-PS-2G/230AC-400DC/48DC/5

Primary-switched TRIO power supply for DIN rail mounting, input: 230 V AC/400 V DC, output: 48 V DC / 5 A, dynamic boost, tool-free fast-connection technology for rigid and flexible conductors with ferrule

文件：649.57 Kbytes 页数：18 Pages

PHOENIXPHOENIX CONTACT

菲尼克斯德国菲尼克斯电气集团

MINI MCR-EX-NAM-2T - Isolation switch amplifier

Ex i-NAMUR signal conditioner for operating proximity sensors and switches in the Ex area. The signals are transmitted to the safe area via 2 transistor outputs (passive). Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection

文件：338.99 Kbytes 页数：11 Pages

PHOENIXPHOENIX CONTACT

菲尼克斯德国菲尼克斯电气集团

MINI MCR-EX-NAM-2T-PT - Isolation switch amplifier

Ex i-NAMUR signal conditioner for operating proximity sensors and switches in the Ex area. The signals are transmitted to the safe area via 2 transistor outputs (passive). Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection

文件：338.82 Kbytes 页数：11 Pages

PHOENIXPHOENIX CONTACT

菲尼克斯德国菲尼克斯电气集团

MINI MCR-EX-NAM-RO-PT - Isolation switch amplifier

Ex i-NAMUR signal conditioner for operating proximity sensors and switches. The signals are transmitted to the control level via 1 solid-state relay at the output (passive). number of channels: 1, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in

文件：336.95 Kbytes 页数：11 Pages

PHOENIXPHOENIX CONTACT

菲尼克斯德国菲尼克斯电气集团

MINI MCR-EX-NAM-RO - Isolation switch amplifier

Ex i-NAMUR signal conditioner for operating proximity sensors and switches. The signals are transmitted to the control level via 1 solid-state relay at the output (passive). number of channels: 1, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw co

文件：337.09 Kbytes 页数：11 Pages

PHOENIXPHOENIX CONTACT

菲尼克斯德国菲尼克斯电气集团

MINI MCR-EX-SD-20-25-LP - Solenoid driver

Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. open-circuit voltage: 20 V DC, current limitation: 25 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection

文件：322.32 Kbytes 页数：10 Pages

PHOENIXPHOENIX CONTACT

菲尼克斯德国菲尼克斯电气集团