TRANSZORB Transient Voltage Suppressors

Features • Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop Circuit Protection • Glass passivated junction • 1500W peak pulse power capabililty on 10/1000µs waveform, repetition rate (duty cycle): 0.05 • Excellent clamping capability • Low incremental surge

文件：113.66 Kbytes 页数：6 Pages

VishayVishay Siliconix

威世威世科技公司

Transient Voltage Suppressors (TVS)

Features ■ Glass passivated junction ■ Low zener impedance ■ Excellent clamping capability ■ 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response time ■ Typical IR less than 1μA above 12V. ■ High Temperature soldering guaranteed:

文件：437.49 Kbytes 页数：8 Pages

YAGEO

国巨

Voltage 6.8V ~ 550V 1500W Peak Power / 5.0W Steady State 1500W Peak Power TVS

FEATURES * 1500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds / .375(9.5mm) lead

文件：332.96 Kbytes 页数：3 Pages

SECOS

喜可士

Plastic package has UL flammability Classification 94V-0

Reverse Voltage: 6.8 to 440 V Peak Pulse Power: 1500 W Features • Plastic package has UL flammability Classification 94V-0 • 1500 W peak pulse power capability on 10/1000 µs waveform, repetition rate (duty cycle): 0.01 • Excellent clamping capability • Low incremental surge res

文件：528.23 Kbytes 页数：4 Pages

SEMTECH_ELEC

先之科半导体

TRANSIENT VOLTAGE SUPPRESSOR

VBR : 6.8 - 440 Volts PPK : 1500 Watts FEATURES : * 1500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V

文件：654.88 Kbytes 页数：3 Pages

SYNSEMI

1500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 6.8 to 440 Volts 1500 Watts Peak Power 5.0 Watts Steady State FEATURES * 1500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A abov

文件：87.67 Kbytes 页数：4 Pages

UNIOHM

厚声

GENERAL PURPOSE TRANSIENT SUPPRESSORS

GENERAL PURPOSE TRANSIENT SUPPRESSORS

文件：79.65 Kbytes 页数：1 Pages

NJSEMINew Jersey Semi-Conductor Products, Inc.

新泽西半导体新泽西半导体公司

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 1500 Watt Peak Power 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in Molded Plastic package • 1500W surge capability at 1ms • Excellent clamping capability • Low

文件：254.66 Kbytes 页数：5 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 6.8 to 440 Volts POWER DISSIPATION - 1500 Watts FEATURES ● Glass passivate chip ● Low leakage ● Uni and bidirectional unit ● Excellent clamping capability ● Plastic material has UL recognition 94V-0 ● Fast response time

文件：46.42 Kbytes 页数：4 Pages

HY

虹扬科技

Low zener impedance.

DESCRIPTION: The 1.5KE series of high current uni/bi-directional transient suppressors are designed for A.C. line protection and high power DC bus clamping applications. These devices offer uni/bi-directional port protection from 6.8 volts to 600 volts. They provide a clamping voltage lower than

文件：218.77 Kbytes 页数：5 Pages

JIEJIE

捷捷微电