丝印：V14；Package：SOT753；Single Schmitt-trigger inverter

1. General description The 74LVC1G14 is a single inverter with Schmitt-trigger inputs. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. This device is fully specified for partial power down ap

文件：290.39 Kbytes 页数：19 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：V14；Package：SC-74A；Single Schmitt trigger inverter

1. General description The 74LVC1G14-Q100 is a single inverter with Schmitt-trigger inputs. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. This device is fully specified for partial power do

文件：253.79 Kbytes 页数：15 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：V14；Package：SC-74A；Single Schmitt trigger inverter

1. General description The 74LVC1G14-Q100 is a single inverter with Schmitt-trigger inputs. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. This device is fully specified for partial power do

文件：280.68 Kbytes 页数：17 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：V14；Package：SOT457；Dual inverting Schmitt trigger with 5 V tolerant input

1. General description The 74LVC2G14 is a dual inverter with Schmitt-trigger inputs. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. This device is fully specified for partial power down app

文件：266.8 Kbytes 页数：17 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：V14；Package：SOT765-1；Triple inverting Schmitt trigger with 5 V tolerant input

1. General description The 74LVC3G14 provides three inverting buffers with Schmitt trigger input. It is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. The inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use

文件：277.21 Kbytes 页数：18 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：V14；Package：SOT505-2；Triple inverting Schmitt trigger with 5 V tolerant input

1. General description The 74LVC3G14 provides three inverting buffers with Schmitt trigger input. It is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. The inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use

文件：277.21 Kbytes 页数：18 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：V14；Package：SOT833-1；Triple inverting Schmitt trigger with 5 V tolerant input

1. General description The 74LVC3G14 provides three inverting buffers with Schmitt trigger input. It is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. The inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use

文件：277.21 Kbytes 页数：18 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：V14；Package：SOT-23；Small Signal Zener Diodes, Dual

FEATURES • Dual silicon planar Zener diodes, common cathode • The Zener voltages are graded according to the international E24 standard. Standard Zener voltage tolerance is ± 5 . Replace “C” with “B” for 2 tolerance • The parameters are valid for both diodes in one case.VZ and Rzj of the two

文件：119.89 Kbytes 页数：8 Pages

VishayVishay Siliconix

威世科技威世科技半导体

丝印：V14；Package：SC-88A；TinyLogic ULP-A Inverter with Schmitt-Trigger Input

The NC7SV14 is a single inverter with Schmitt−Trigger Input in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 2.0 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Su

文件：336.5 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

丝印：V14；Package：SC-88；TinyLogic ULP-A Dual Inverter with Schmitt-Trigger Input

The NC7WV14 is a dual inverter with Schmitt−trigger input in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 2.2 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Suppo

文件：176.38 Kbytes 页数：10 Pages

ONSEMI

安森美半导体