UM5080T

低电容双向单线ESD保护二极管; - Transient Protection for Data Lines to\n   IEC 61000-4-2 (ESD) ±30kV (Air), ±30kV (Contact)\n- Small Package for Use in Portable Electronics\n- Suitable Replacement for MLV’s in ESD Protection Applications\n- Bidirectional TVS Protection\n- Stand off Voltage: 5V\n- Low leakage Current\n- Low Diode Capacitance\n- Small Body Outline Dimensions: 1.0mm×0.6mm;

The UM5080T TVS protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA’s. They feature large cross-sectional area junctions for conducting high transient currents, offer desirable electrical characteristics for board level protection, such as fast response time, lower operating voltage, lower clamping voltage and no device degradation when compared to MLVs. The UM5080T TVS protection diode protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. The UM5080T is available in DFN2 1.0×0.6 (compatible with SOD923/SOD882/CSP 1.0×0.6) package with working voltages of 5 volt. It gives designer the flexibility to protect bidirectional single line in applications where arrays are not practical. Additionally, it may be “sprinkled” around the board in applications where board space is at a premium. It may be used to meet the ESD immunity requirements of IEC 61000-4-2, ±30kV air, ±30kV contact discharge.

UM5082

双线ESD保护二极管阵列; - Transient Protection for Data & Power Lines to\n  IEC 61000-4-2 (ESD) ±15kV(Air)，\n  IEC 61000-4-2 (ESD) ±8kV (Contact)\n- Small Package for Use in Portable Electronics\n- Suitable Replacement for MLV’s in ESD Protection Applications\n- Protect One or Two I/O Lines\n- Low Clamping Voltage\n- Stand-Off Voltage: 5V\n- Low Leakage Current\n- Solid-State Silicon-Avalanche Technology;

The UM5082 ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA’s. It features large cross-sectional area junctions for conducting high transient currents, offers desirable electrical characteristics for board level protection, such as fast response time, lower operating voltage, lower clamping voltage and no device degradation when compared to MLVs.\n\nThe UM5082 ESD protection diode protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. The UM5082 is available in a DFN3 1.0×0.6 package with working voltages of 5 volt.\n\nIt gives designer the flexibility to protect one or two unidirectional line in applications where arrays are not practical. Additionally, it may be “sprinkled” around the board in applications where board space is at a premium. It may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15kV air, ±8kV contact discharge).

UM5084

12V低电容双向单线TVS保护二极管; - Transient Protection for Data Lines to\n  IEC 61000-4-2 (ESD)：\n  ±15kV (Air), ±8kV (Contact)\n- Small Package for Use in Portable Electronics\n- Suitable Replacement for MLV’s in ESD Protection Applications\n- Bidirectional TVS Protection\n- Stand-Off Voltages: 12V\n- Low Leakage Current\n- Low Diode Capacitance\n- Small Body Outline Dimensions: 1.0mm×0.6mm;

The UM5084 TVS protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA’s. They feature large cross-sectional area junctions for conducting high transient currents, offer desirable electrical characteristics for board level protection, such as fast response time, lower operating voltage, lower clamping voltage and no device degradation when compared to MLVs. The UM5084 TVS protection diode protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. The UM5084 is available in DFN2 1.0×0.6 (compatible with SOD923/SOD882/CSP 1.0×0.6) package with working voltages of 12 volt. It gives designer the flexibility to protect bidirectional single line in applications where arrays are not practical. Additionally, it may be “sprinkled” around the board in applications where board space is at a premium. It may be used to meet the ESD immunity requirements of IEC 61000-4-2, ±15kV air, ±8kV contact discharge.

UM5080

Low Capacitance Bidirectional Single Line TVS Protection Diode

UM5080_16

Low Capacitance Bidirectional Single Line TVS Protection Diode

UM5080A

Low Capacitance Bidirectional Single Line TVS Protection Diode

UM5080T

Low Capacitance Bidirectional Single Line TVS Protection Diode

UM5080T_16

Low Capacitance Bidirectional Single Line TVS Protection Diode

UM5082

Dual Line ESD Protection Diode Array

UM5084

Low Capacitance Bidirectional Single Line TVS Protection Diode