UCC21717-Q1中文资料德州仪器数据手册PDF规格书

1 Features

• 5.7-kVRMS single channel isolated gate driver

• AEC-Q100 qualified for automotive applications

– Device temperature grade 0: -40°C to +150°C

ambient operating temperature range

– Device HBM ESD classification level 3A

– Device CDM ESD classification level C6

• Functional Safety Quality-Managed

– Documentation available to aid functional safety

system design

– Documentation available to aid functional safety

system design

• SiC MOSFETs and IGBTs up to 2121Vpk

• 33-V maximum output drive voltage (VDD-VEE)

• ±10-A drive strength and split output

• 150-V/ns minimum CMTI

• 270-ns response time fast overcurrent protection

• 4-A internal active Miller clamp

• 400-mA soft turn-off under fault condition

• Isolated analog sensor with PWM output for

– Temperature sensing with NTC, PTC or thermal

diode

– High voltage DC-Link or phase voltage

• Alarm FLT on over current and reset from RST/EN

• Disabling the device with RST/EN triggers a soft

turn off

• Rejects <40-ns noise transient and pulses on input

pins

• 12-V VDD UVLO with power good on RDY

• Inputs/outputs with over/under-shoot transient

voltage immunity up to 5 V

• 130-ns (maximum) propagation delay and 30-ns

(maximum) pulse/part skew

• SOIC-16 DW package with creepage and

clearance distance > 8 mm

• Operating junction temperature –40°C to 150°C

2 Applications

• Traction inverter for EVs

• On-board charger and charging pile

• DC/DC converter for HEV/EVs

3 Description

The UCC21717-Q1 is a galvanically isolated single

channel gate driver designed to drive up to 1700V SiC

MOSFETs and IGBTs. It features advanced integrated

protection, best-in-class dynamic performance, and

robustness. UCC21717-Q1 has up to ±10-A peak

source and sink current.

The input side is isolated from the output side with

SiO2 capacitive isolation technology, supporting up to

1.5-kVRMS working voltage, 12.8-kVPK surge immunity

with longer than 40 years Isolation barrier life, as well

as providing low part-to-part skew, and >150-V/ns

common mode noise immunity (CMTI).

The UCC21717-Q1 includes the state-of-art protection

features, such as fast overcurrent and short circuit

detection, shunt current sensing support, fault

reporting, active Miller clamp, and input and output

side power supply UVLO to optimize SiC and IGBT

switching behavior and robustness. The isolated

analog to PWM sensor can be utilized for easier

temperature or voltage sensing, further increasing the

drivers' versatility and simplifying the system design

effort, size and cost.