TPCE280中文资料PCI Express x8, Gen3 XMC Carrier数据手册TEWS规格书

描述 Description

The TPCE278 is a standard height PCI Express Revision 3.0 compatible module that provides one slot for a single-width XMC module used to build modular, flexible and cost effective I/O solutions for all kinds of applications like process control, medical systems, telecommunication and traffic control.The TPCE278 is a versatile solution to upgrade well known XMC I/O solutions to the PCI Express signalling standard.The PCI Express x4 link from the host board to the XMC module is enhanced by a PCIe Gen3 Redriver, allowing safe operation of XMC modules on PCIe mainboards.VPWR is selectable via order option. The TPCE278-x0R variants provide 12V VPWR and the TPCE278-x1R order options provide 5V VPWR.The TPCE278 supports XMC front panel I/O, and also P14 and P16 rear I/O independently.XMC P14 rear I/O is provided through a Tyco AMPMODU System 50 0.050x0.100 flat ribbon cable connector. The I/O lines are routed differentially.XMC P16 rear I/O is implemented through two Samtec QTH-DP 0.50mm Q Pairs High Speed Ground Plane Socket Strip, Differential Pair connector providing access to all P16 I/O lines.The PCIe edge card connector provides +12V and +3.3V. The TPCE278-1xR uses the +12V of the PCIe edge card connector to generate all power supply voltages for the XMC slot (+3.3V, VPWR and +12V).According to the PCIe specification, a PCIe x4 card is allowed to use 25W on the +12V which allows to operate most of the available XMC modules on the TPCE278-1xR. For increased power requirements of an XMC module, the TPCE278-2xR offer a PCIe Graphics Power Connector to supply the +12V for generating all the power supply voltages for the XMC slot providing power of up to 75W.A 10-pin JTAG header is available for XMC module debugging purposes. All five JTAG signals are routed directly to the XMC slot.