TPCE275中文资料PCI Express x1, Gen 1 XMC Carrier数据手册TEWS规格书

描述 Description

The TPCE275 is a standard height PCI Express Revision 1.1 compatible module that provides one slot for a single-width XMC module used to build modular, flexible and cost effective I/O solutions for all kinds of applications like process control, medical systems, telecommunication and traffic control.The TPCE275 is a versatile solution to upgrade well known XMC I/O solutions to the PCI Express signalling standard.The PCI Express x1 link from the host board to the XMC module is enhanced by a PCIe Redriver, allowing safe operation of XMC modules on PCIe mainboards.VPWR is selectable via order option. The TPCE275-x0R variants provide for 12V VPWR and the TPCE275-x1R order options provide 5V VPWR.The TPCE275 supports XMC front panel I/O, and also P14 and P16 rear I/O independently.XMC P14 rear I/O is provided through a VME P2 style connector (IEC 60603-2, Type C). The I/O mapping of P14 complies with VITA-35 (PMC P4 to VME-P2, Rows A-C mapping).XMC P16 rear I/O is provided through two 50-pin flat cable connectors mounted in a 2.54mm grid.The PCIe edge card connector provides +12V and +3.3V. The TPCE275-1xR uses the +12V of the PCIe edge card connector to generate all power supply voltages for the XMC slot (+3.3V, VPWR and +12V).According to the PCIe specification, a PCIe x1 card is limited to 6W on the +12V which allows to operate many of the available XMC modules on the TPCE275-1xR.For increased power requirements of an XMC module, the TPCE275-2xR offer a PCIe Graphics Power Connector to supply the +12V for generating all the power supply voltages for the XMC slot providing power of up to 25W.A 10-pin JTAG header is available for XMC module debugging purposes. All five JTAG signals are routed directly to the XMC slot.