TMS320VC5409A数据手册集成电路（IC）的DSP（数字信号处理器）规格书PDF

描述 Description

The TMS320VC5409A fixed-point, digital signal processor (DSP) (hereafterreferred to as the 5409A unless otherwise specified) is based on an advancedmodified Harvard architecture that has one program memory bus and three datamemory buses. This processor provides an arithmetic logic unit (ALU) with a highdegree of parallelism, application-specific hardware logic, on-chip memory, andadditional on-chip peripherals. The basis of the operational flexibility andspeed of this DSP is a highly specialized instruction set.
Separate program and data spaces allow simultaneous access to programinstructions and data, providing a high degree of parallelism. Two readoperations and one write operation can be performed in a single cycle.Instructions with parallel store and application-specific instructions can fullyutilize this architecture. In addition, data can be transferred between data andprogram spaces. Such parallelism supports a powerful set of arithmetic, logic,and bit-manipulation operations that can all be performed in a single machinecycle. The 5409A also includes the control mechanisms to manage interrupts,

特性 Features

• Advanced Multibus Architecture With Three Separate 16-Bit Data MemoryBuses and One Program Memory Bus
• 40-Bit Arithmetic Logic Unit (ALU) Including a 40-Bit Barrel Shifter andTwo Independent 40-Bit Accumulators
• 17- \\xD7 17-Bit Parallel Multiplier Coupled to a 40-Bit Dedicated Adder forNon-Pipelined Single-Cycle Multiply/Accumulate (MAC) Operation
• Compare, Select, and Store Unit (CSSU) for the Add/Compare Selection ofthe Viterbi Operator
• Exponent Encoder to Compute an Exponent Value of a 40-Bit AccumulatorValue in a Single Cycle
• Two Address Generators With Eight Auxiliary Registers and Two AuxiliaryRegister Arithmetic Units (ARAUs)
• Data Bus With a Bus Holder Feature
• Extended Addressing Mode for 8M \\xD7 16-Bit Maximum Addressable ExternalProgram Space
• 32K x 16-Bit On-Chip RAM Composed of:
• Four Blocks of 8K \\xD7 16-Bit On-Chip Dual-Access Program/Data RAM
• 16K \\xD7 16-Bit On-Chip ROM Configured for Program Memory
• Enhanced External Parallel Interface (XIO2)
• Single-Instruction-Repeat and Block-Repeat Operations for Program Code
• Block-Memory-Move Instructions for Better Program and Data Management
• Instructions With a 32-Bit Long Word Operand
• Instructions With Two- or Three-Operand Reads
• Arithmetic Instructions With Parallel Store and Parallel Load
• Conditional Store Instructions
• Fast Return From Interrupt
• On-Chip Peripherals
• Software-Programmable Wait-State Generator and ProgrammableBank-Switching
• On-Chip Programmable Phase-Locked Loop (PLL) Clock Generator WithInternal Oscillator or External Clock Source
• One 16-Bit Timer
• Six-Channel Direct Memory Access (DMA) Controller
• Three Multichannel Buffered Serial Ports (McBSPs)
• 8/16-Bit Enhanced Parallel Host-Port Interface (HPI8/16)
• Power Consumption Control With IDLE1, IDLE2, and IDLE3 Instructions WithPower-Down Modes
• CLKOUT Off Control to Disable CLKOUT
• On-Chip Scan-Based Emulation Logic, IEEE Std 1149.1
• (JTAG)Boundary Scan Logic
• 144-Pin Ball Grid Array (BGA) (GGU Suffix)
• 144-Pin Low-Profile Quad Flatpack (LQFP) (PGE Suffix)
• 6.25-ns Single-Cycle Fixed-Point Instruction Execution Time (160 MIPS)
• 8.33-ns Single-Cycle Fixed-Point Instruction Execution Time (120 MIPS)
• 3.3-V I/O Supply Voltage (160 and 120 MIPS)
• 1.6-V Core Supply Voltage (160 MIPS)
• 1.5-V Core Supply Voltage (120 MIPS)
The on-chip oscillator is not available on all 5409Adevices. For applicable devices, see the TMS320VC5409A Digital SignalProcessor Silicon Errata (literature number SPRZ186).
• IEEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary ScanArchitecture. NOTE: This data manual is designed to be used in conjunctionwith the TMS320C54x\\x99 DSP Functional Overview (literature numberSPRU307). TMS320C54x, MicroStar BGA, C54x, TMS320C5000, C5000, TMS320 aretrademarks of Texas Instruments. All trademarks are the property of theirrespective owners.